log

[    0.000000] Linux version 6.8.0-rc2-next-dirty (root@n350tw) (gcc (Gentoo 13.2.1_p20240113-r1 p12) 13.2.1 20240113, GNU ld (Gentoo 2.41 p5) 2.41.0) #5 SMP Mon Jan 29 07:14:37 CET 2024
[    0.000000] Command line: BOOT_IMAGE=/boot/kernel-next root=/dev/disk/by-label/SYS_ROOT mitigations=off i915.mitigations=off i915.enable_guc=2
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000021397fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000021398000-0x0000000021c97fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000021c98000-0x0000000037eaefff] usable
[    0.000000] BIOS-e820: [mem 0x0000000037eaf000-0x00000000380aefff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000380af000-0x000000003949efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003949f000-0x0000000039b8efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000039b8f000-0x0000000039c0efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000039c0f000-0x0000000039c0ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000039c10000-0x000000003f7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff600000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000008be7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] efi: EFI v2.6 by INSYDE Corp.
[    0.000000] efi: ACPI=0x39c0e000 ACPI 2.0=0x39c0e014 SMBIOS=0x3829d000 SMBIOS 3.0=0x3829b000 ESRT=0x38299898 MEMATTR=0x2842b018 
[    0.000000] efi: Remove mem64: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[    0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[    0.000000] efi: Not removing mem65: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[    0.000000] efi: Not removing mem66: MMIO range=[0xfed10000-0xfed19fff] (40KB) from e820 map
[    0.000000] efi: Not removing mem67: MMIO range=[0xfed84000-0xfed84fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem68: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[    0.000000] efi: Remove mem69: MMIO range=[0xff600000-0xffffffff] (10MB) from e820 map
[    0.000000] e820: remove [mem 0xff600000-0xffffffff] reserved
[    0.000000] SMBIOS 3.0.1 present.
[    0.000000] DMI: SCHENKER SCHENKER_DOCK_15_SDO15L18_SDO15E19/N350TW                          , BIOS 1.07.05RTR1 08/14/2018
[    0.000000] tsc: Detected 2100.000 MHz processor
[    0.000000] tsc: Detected 2099.944 MHz TSC
[    0.000004] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000007] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000013] last_pfn = 0x8be800 max_arch_pfn = 0x400000000
[    0.000018] MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs
[    0.000020] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000371] last_pfn = 0x39c10 max_arch_pfn = 0x400000000
[    0.000377] esrt: Reserving ESRT space from 0x0000000038299898 to 0x0000000038299920.
[    0.000386] Using GB pages for direct mapping
[    0.001113] Secure boot disabled
[    0.001113] RAMDISK: [mem 0x36d77000-0x37251fff]
[    0.001116] ACPI: Early table checksum verification disabled
[    0.001118] ACPI: RSDP 0x0000000039C0E014 000024 (v02 INSYDE)
[    0.001123] ACPI: XSDT 0x0000000039C0E120 0000B4 (v01 INSYDE CNLH     00000001      01000013)
[    0.001129] ACPI: FACP 0x0000000039BFD000 00010C (v05 INSYDE CNLH     00000001 ACPI 00040000)
[    0.001134] ACPI: DSDT 0x0000000039BC8000 031DCB (v02 INSYDE CNLH     00000000 ACPI 00040000)
[    0.001138] ACPI: FACS 0x0000000039AEE000 000040
[    0.001141] ACPI: SSDT 0x0000000039C0B000 0017C6 (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.001144] ACPI: SSDT 0x0000000039C07000 003144 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.001147] ACPI: SSDT 0x0000000039C02000 000C2F (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[    0.001150] ACPI: SSDT 0x0000000039BFF000 00047E (v02 Intel  PerfTune 00001000 INTL 20160422)
[    0.001153] ACPI: UEFI 0x0000000039C0D000 000236 (v01 INSYDE CNLH     00000001 ACPI 00040000)
[    0.001156] ACPI: UEFI 0x0000000039C06000 000042 (v01 INSYDE CNLH     00000002 ACPI 00040000)
[    0.001159] ACPI: LPIT 0x0000000039C04000 00005C (v01 INSYDE CNLH     00000000 ACPI 00040000)
[    0.001162] ACPI: WSMT 0x0000000039C03000 000028 (v01 INSYDE CNLH     00000000 ACPI 00040000)
[    0.001165] ACPI: DBGP 0x0000000039C01000 000034 (v01 INSYDE CNLH     00000002 ACPI 00040000)
[    0.001168] ACPI: DBG2 0x0000000039C00000 000061 (v00 INSYDE CNLH     00000002 ACPI 00040000)
[    0.001171] ACPI: ASF! 0x0000000039BFE000 0000A5 (v32 INSYDE CNLH     00000001 ACPI 00040000)
[    0.001174] ACPI: HPET 0x0000000039BFC000 000038 (v01 INSYDE CNLH     00000001 ACPI 00040000)
[    0.001177] ACPI: APIC 0x0000000039BFB000 00012C (v03 INSYDE CNLH     00000001 ACPI 00040000)
[    0.001180] ACPI: MCFG 0x0000000039BFA000 00003C (v01 INSYDE CNLH     00000001 ACPI 00040000)
[    0.001183] ACPI: DMAR 0x0000000039BC7000 0000A8 (v01 INSYDE CNLH     00000002 ACPI 00040000)
[    0.001186] ACPI: FPDT 0x0000000039BC6000 000044 (v01 INSYDE CNLH     00000002 ACPI 00040000)
[    0.001189] ACPI: BGRT 0x0000000039BC5000 000038 (v01 INSYDE CNLH     00000001 ACPI 00040000)
[    0.001191] ACPI: Reserving FACP table memory at [mem 0x39bfd000-0x39bfd10b]
[    0.001193] ACPI: Reserving DSDT table memory at [mem 0x39bc8000-0x39bf9dca]
[    0.001195] ACPI: Reserving FACS table memory at [mem 0x39aee000-0x39aee03f]
[    0.001196] ACPI: Reserving SSDT table memory at [mem 0x39c0b000-0x39c0c7c5]
[    0.001197] ACPI: Reserving SSDT table memory at [mem 0x39c07000-0x39c0a143]
[    0.001198] ACPI: Reserving SSDT table memory at [mem 0x39c02000-0x39c02c2e]
[    0.001199] ACPI: Reserving SSDT table memory at [mem 0x39bff000-0x39bff47d]
[    0.001200] ACPI: Reserving UEFI table memory at [mem 0x39c0d000-0x39c0d235]
[    0.001201] ACPI: Reserving UEFI table memory at [mem 0x39c06000-0x39c06041]
[    0.001202] ACPI: Reserving LPIT table memory at [mem 0x39c04000-0x39c0405b]
[    0.001203] ACPI: Reserving WSMT table memory at [mem 0x39c03000-0x39c03027]
[    0.001204] ACPI: Reserving DBGP table memory at [mem 0x39c01000-0x39c01033]
[    0.001205] ACPI: Reserving DBG2 table memory at [mem 0x39c00000-0x39c00060]
[    0.001206] ACPI: Reserving ASF! table memory at [mem 0x39bfe000-0x39bfe0a4]
[    0.001208] ACPI: Reserving HPET table memory at [mem 0x39bfc000-0x39bfc037]
[    0.001209] ACPI: Reserving APIC table memory at [mem 0x39bfb000-0x39bfb12b]
[    0.001210] ACPI: Reserving MCFG table memory at [mem 0x39bfa000-0x39bfa03b]
[    0.001211] ACPI: Reserving DMAR table memory at [mem 0x39bc7000-0x39bc70a7]
[    0.001212] ACPI: Reserving FPDT table memory at [mem 0x39bc6000-0x39bc6043]
[    0.001213] ACPI: Reserving BGRT table memory at [mem 0x39bc5000-0x39bc5037]
[    0.001239] No NUMA configuration found
[    0.001240] Faking a node at [mem 0x0000000000000000-0x00000008be7fffff]
[    0.001245] NODE_DATA(0) allocated [mem 0x8be7f4000-0x8be7fdfff]
[    0.001282] Zone ranges:
[    0.001282]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.001285]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.001287]   Normal   [mem 0x0000000100000000-0x00000008be7fffff]
[    0.001288] Movable zone start for each node
[    0.001289] Early memory node ranges
[    0.001290]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.001292]   node   0: [mem 0x0000000000100000-0x0000000021397fff]
[    0.001293]   node   0: [mem 0x0000000021c98000-0x0000000037eaefff]
[    0.001294]   node   0: [mem 0x0000000039c0f000-0x0000000039c0ffff]
[    0.001295]   node   0: [mem 0x0000000100000000-0x00000008be7fffff]
[    0.001299] Initmem setup node 0 [mem 0x0000000000001000-0x00000008be7fffff]
[    0.001303] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.001330] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.002784] On node 0, zone DMA32: 2304 pages in unavailable ranges
[    0.002852] On node 0, zone DMA32: 7520 pages in unavailable ranges
[    0.055136] On node 0, zone Normal: 25584 pages in unavailable ranges
[    0.055192] On node 0, zone Normal: 6144 pages in unavailable ranges
[    0.055207] Reserving Intel graphics memory at [mem 0x3b800000-0x3f7fffff]
[    0.055462] ACPI: PM-Timer IO Port: 0x1808
[    0.055469] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.055471] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.055472] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.055473] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.055474] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.055475] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.055476] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.055477] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.055478] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.055478] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.055479] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.055480] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.055481] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.055482] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.055483] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.055484] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.055536] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.055539] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.055541] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.055546] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.055547] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.055550] TSC deadline timer available
[    0.055550] smpboot: Allowing 16 CPUs, 0 hotplug CPUs
[    0.055567] [mem 0x3f800000-0xfdffffff] available for PCI devices
[    0.055570] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.060294] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.060959] percpu: Embedded 46 pages/cpu s148648 r8192 d31576 u262144
[    0.060967] pcpu-alloc: s148648 r8192 d31576 u262144 alloc=1*2097152
[    0.060970] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.060996] Kernel command line: BOOT_IMAGE=/boot/kernel-next root=/dev/disk/by-label/SYS_ROOT mitigations=off i915.mitigations=off i915.enable_guc=2
[    0.061041] Unknown kernel command line parameters "BOOT_IMAGE=/boot/kernel-next", will be passed to user space.
[    0.061050] random: crng init done
[    0.064192] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.065760] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.065898] Fallback order for Node 0: 0 
[    0.065902] Built 1 zonelists, mobility grouping on.  Total pages: 8216377
[    0.065903] Policy zone: Normal
[    0.065904] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.065906] software IO TLB: area num 16.
[    0.140205] Memory: 32652248K/33387832K available (10240K kernel code, 1522K rwdata, 2540K rodata, 1244K init, 2292K bss, 735328K reserved, 0K cma-reserved)
[    0.140276] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.140373] rcu: Hierarchical RCU implementation.
[    0.140374] 	Tracing variant of Tasks RCU enabled.
[    0.140374] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.140388] NR_IRQS: 4352, nr_irqs: 2184, preallocated irqs: 16
[    0.140654] rcu: 	Offload RCU callbacks from CPUs: 0-15.
[    0.140657] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.140890] Console: colour dummy device 80x25
[    0.140892] printk: legacy console [tty0] enabled
[    0.141092] ACPI: Core revision 20230628
[    0.141489] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.141583] APIC: Switch to symmetric I/O mode setup
[    0.141589] APIC: Switched APIC routing to: physical flat
[    0.148344] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.165013] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e44fb6c2ab, max_idle_ns: 440795206594 ns
[    0.165019] Calibrating delay loop (skipped), value calculated using timer frequency.. 4201.88 BogoMIPS (lpj=6999813)
[    0.165052] CPU0: Thermal monitoring enabled (TM1)
[    0.165107] process: using mwait in idle threads
[    0.165111] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.165113] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.165116] Spectre V2 : User space: Vulnerable
[    0.165118] Speculative Store Bypass: Vulnerable
[    0.165121] SRBDS: Vulnerable: No microcode
[    0.165123] GDS: Vulnerable: No microcode
[    0.165129] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.165131] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.165133] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.165135] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.165136] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.165138] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.165141] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.165143] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.165145] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.165536] Freeing SMP alternatives memory: 32K
[    0.165538] pid_max: default: 32768 minimum: 301
[    0.168435] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.168487] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.171753] smpboot: CPU0: Intel(R) Core(TM) i9-9900T CPU @ 2.10GHz (family: 0x6, model: 0x9e, stepping: 0xd)
[    0.171877] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[    0.171890] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.171912] ... version:                4
[    0.171913] ... bit width:              48
[    0.171915] ... generic registers:      4
[    0.171916] ... value mask:             0000ffffffffffff
[    0.171918] ... max period:             00007fffffffffff
[    0.171920] ... fixed-purpose events:   3
[    0.171921] ... event mask:             000000070000000f
[    0.172038] signal: max sigframe size: 1616
[    0.172044] Estimated ratio of average max frequency by base frequency (times 1024): 1024
[    0.172066] rcu: Hierarchical SRCU implementation.
[    0.172068] rcu: 	Max phase no-delay instances is 1000.
[    0.172217] smp: Bringing up secondary CPUs ...
[    0.172296] smpboot: x86: Booting SMP configuration:
[    0.172298] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
[    0.176633] smp: Brought up 1 node, 16 CPUs
[    0.176633] smpboot: Max logical packages: 1
[    0.176633] smpboot: Total of 16 processors activated (67225.13 BogoMIPS)
[    0.178809] devtmpfs: initialized
[    0.178890] ACPI: PM: Registering ACPI NVS region [mem 0x3949f000-0x39b8efff] (7274496 bytes)
[    0.178890] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.178890] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.178890] pinctrl core: initialized pinctrl subsystem
[    0.178890] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.178890] thermal_sys: Registered thermal governor 'step_wise'
[    0.178890] thermal_sys: Registered thermal governor 'user_space'
[    0.178890] cpuidle: using governor menu
[    0.178890] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.178890] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[    0.178890] PCI: not using ECAM ([mem 0xe0000000-0xefffffff] not reserved)
[    0.178890] PCI: Using configuration type 1 for base access
[    0.178890] cryptd: max_cpu_qlen set to 1000
[    0.178890] ACPI: Added _OSI(Module Device)
[    0.178890] ACPI: Added _OSI(Processor Device)
[    0.178890] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.178890] ACPI: Added _OSI(Processor Aggregator Device)
[    0.217856] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.218966] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.223586] ACPI: Dynamic OEM Table Load:
[    0.223596] ACPI: SSDT 0xFFFF888100CA8C00 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.224368] ACPI: Dynamic OEM Table Load:
[    0.224375] ACPI: SSDT 0xFFFF888100CA2800 000525 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.225435] ACPI: Dynamic OEM Table Load:
[    0.225445] ACPI: SSDT 0xFFFF88810008D000 000EF1 (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.226744] ACPI: Dynamic OEM Table Load:
[    0.226752] ACPI: SSDT 0xFFFF888100CA9000 00030A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.230440] ACPI: _OSC evaluated successfully for all CPUs
[    0.230659] ACPI: EC: EC started
[    0.230660] ACPI: EC: interrupt blocked
[    0.231681] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.231685] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[    0.231690] ACPI: Interpreter enabled
[    0.231734] ACPI: PM: (supports S0 S3 S5)
[    0.231736] ACPI: Using IOAPIC for interrupt routing
[    0.231780] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[    0.232560] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource
[    0.232572] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.232575] PCI: Using E820 reservations for host bridge windows
[    0.232795] ACPI: Enabled 5 GPEs in block 00 to 7F
[    0.246578] ACPI: \_SB_.PCI0.SAT0.VOL0.V0PR: New power resource
[    0.246687] ACPI: \_SB_.PCI0.SAT0.VOL1.V1PR: New power resource
[    0.246787] ACPI: \_SB_.PCI0.SAT0.VOL2.V2PR: New power resource
[    0.247011] ACPI: \_SB_.PCI0.CNVW.WRST: New power resource
[    0.248620] acpi DOCK0000:00: ACPI dock station (docks/bays count: 1)
[    0.249217] ACPI: \PIN_: New power resource
[    0.249562] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.249570] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.251603] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR]
[    0.254024] PCI host bridge to bus 0000:00
[    0.254028] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.254031] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.254034] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.254036] pci_bus 0000:00: root bus resource [mem 0x3f800000-0xdfffffff window]
[    0.254039] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.254041] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.254044] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.254069] pci 0000:00:00.0: [8086:3e30] type 00 class 0x060000 conventional PCI endpoint
[    0.254155] pci 0000:00:02.0: [8086:3e98] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
[    0.254166] pci 0000:00:02.0: BAR 0 [mem 0x6000000000-0x6000ffffff 64bit]
[    0.254174] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref]
[    0.254180] pci 0000:00:02.0: BAR 4 [io  0x4000-0x403f]
[    0.254197] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.254201] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.254444] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000 conventional PCI endpoint
[    0.254465] pci 0000:00:12.0: BAR 0 [mem 0x6001109000-0x6001109fff 64bit]
[    0.254627] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330 conventional PCI endpoint
[    0.254645] pci 0000:00:14.0: BAR 0 [mem 0x42220000-0x4222ffff 64bit]
[    0.254706] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.255031] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000 conventional PCI endpoint
[    0.255052] pci 0000:00:14.2: BAR 0 [mem 0x6001104000-0x6001105fff 64bit]
[    0.255066] pci 0000:00:14.2: BAR 2 [mem 0x6001108000-0x6001108fff 64bit]
[    0.255198] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601 conventional PCI endpoint
[    0.255212] pci 0000:00:17.0: BAR 0 [mem 0x42230000-0x42231fff]
[    0.255221] pci 0000:00:17.0: BAR 1 [mem 0x42234000-0x422340ff]
[    0.255229] pci 0000:00:17.0: BAR 2 [io  0x4080-0x4087]
[    0.255237] pci 0000:00:17.0: BAR 3 [io  0x4088-0x408b]
[    0.255245] pci 0000:00:17.0: BAR 4 [io  0x4060-0x407f]
[    0.255253] pci 0000:00:17.0: BAR 5 [mem 0x42233000-0x422337ff]
[    0.255291] pci 0000:00:17.0: PME# supported from D3hot
[    0.255736] pci 0000:00:1b.0: [8086:a32c] type 01 class 0x060400 PCIe Root Port
[    0.255764] pci 0000:00:1b.0: PCI bridge to [bus 01]
[    0.255849] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.256365] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400 PCIe Root Port
[    0.256390] pci 0000:00:1d.0: PCI bridge to [bus 02]
[    0.256397] pci 0000:00:1d.0:   bridge window [mem 0x42100000-0x421fffff]
[    0.256464] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.256946] pci 0000:00:1d.5: [8086:a335] type 01 class 0x060400 PCIe Root Port
[    0.256974] pci 0000:00:1d.5: PCI bridge to [bus 03]
[    0.256980] pci 0000:00:1d.5:   bridge window [mem 0x42000000-0x420fffff]
[    0.257050] pci 0000:00:1d.5: PME# supported from D0 D3hot D3cold
[    0.257518] pci 0000:00:1d.7: [8086:a337] type 01 class 0x060400 PCIe Root Port
[    0.257546] pci 0000:00:1d.7: PCI bridge to [bus 04-08]
[    0.257551] pci 0000:00:1d.7:   bridge window [io  0x3000-0x3fff]
[    0.257555] pci 0000:00:1d.7:   bridge window [mem 0x41000000-0x41ffffff]
[    0.257565] pci 0000:00:1d.7:   bridge window [mem 0x40000000-0x40ffffff 64bit pref]
[    0.257631] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.258092] pci 0000:00:1f.0: [8086:a304] type 00 class 0x060100 conventional PCI endpoint
[    0.258092] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300 conventional PCI endpoint
[    0.258092] pci 0000:00:1f.3: BAR 0 [mem 0x6001100000-0x6001103fff 64bit]
[    0.258092] pci 0000:00:1f.3: BAR 4 [mem 0x6001000000-0x60010fffff 64bit]
[    0.258092] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.258092] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500 conventional PCI endpoint
[    0.258092] pci 0000:00:1f.4: BAR 0 [mem 0x6001106000-0x60011060ff 64bit]
[    0.258092] pci 0000:00:1f.4: BAR 4 [io  0x4040-0x405f]
[    0.258092] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000 conventional PCI endpoint
[    0.258092] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
[    0.258092] pci 0000:00:1f.6: [8086:15bc] type 00 class 0x020000 conventional PCI endpoint
[    0.258092] pci 0000:00:1f.6: BAR 0 [mem 0x42200000-0x4221ffff]
[    0.258092] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.258092] pci 0000:00:1b.0: PCI bridge to [bus 01]
[    0.258092] pci 0000:02:00.0: [144d:a804] type 00 class 0x010802 PCIe Endpoint
[    0.258092] pci 0000:02:00.0: BAR 0 [mem 0x42100000-0x42103fff 64bit]
[    0.271705] pci 0000:00:1d.0: PCI bridge to [bus 02]
[    0.271816] pci 0000:03:00.0: [8086:2725] type 00 class 0x028000 PCIe Endpoint
[    0.271866] pci 0000:03:00.0: BAR 0 [mem 0x42000000-0x42003fff 64bit]
[    0.272090] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.272152] pci 0000:03:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:1d.5 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[    0.272332] pci 0000:00:1d.5: PCI bridge to [bus 03]
[    0.272428] pci 0000:04:00.0: [10ec:5229] type 00 class 0xff0000 PCIe Endpoint
[    0.272451] pci 0000:04:00.0: BAR 0 [mem 0x41000000-0x41000fff]
[    0.272588] pci 0000:04:00.0: supports D1 D2
[    0.272590] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[    0.272758] pci 0000:00:1d.7: PCI bridge to [bus 04-08]
[    0.274085] ACPI: EC: interrupt unblocked
[    0.274087] ACPI: EC: event unblocked
[    0.274099] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.274101] ACPI: EC: GPE=0x3
[    0.274103] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete
[    0.274106] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
[    0.274221] SCSI subsystem initialized
[    0.274230] libata version 3.00 loaded.
[    0.274233] ACPI: bus type USB registered
[    0.274246] usbcore: registered new interface driver usbfs
[    0.274252] usbcore: registered new interface driver hub
[    0.274261] usbcore: registered new device driver usb
[    0.274272] mc: Linux media interface: v0.10
[    0.274277] videodev: Linux video capture interface: v2.00
[    0.274316] efivars: Registered efivars operations
[    0.275028] Advanced Linux Sound Architecture Driver Initialized.
[    0.275164] PCI: Using ACPI for IRQ routing
[    0.315286] PCI: pci_cache_line_size set to 64 bytes
[    0.315426] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.315429] e820: reserve RAM buffer [mem 0x21398000-0x23ffffff]
[    0.315431] e820: reserve RAM buffer [mem 0x37eaf000-0x37ffffff]
[    0.315432] e820: reserve RAM buffer [mem 0x39c10000-0x3bffffff]
[    0.315433] e820: reserve RAM buffer [mem 0x8be800000-0x8bfffffff]
[    0.318374] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.318374] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.318374] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.318374] vgaarb: loaded
[    0.318396] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.318404] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.322751] clocksource: Switched to clocksource tsc-early
[    0.322867] pnp: PnP ACPI init
[    0.323138] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.323142] system 00:00: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.323146] system 00:00: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[    0.323148] system 00:00: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.323151] system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.323153] system 00:00: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.323156] system 00:00: [mem 0xff000000-0xffffffff] has been reserved
[    0.323428] system 00:01: [io  0x2000-0x20fe] has been reserved
[    0.323509] pnp 00:02: disabling [io  0x3322-0x3323] because it overlaps 0000:00:1d.7 BAR 7 [io  0x3000-0x3fff]
[    0.323535] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.323538] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.323647] system 00:04: [io  0x1854-0x1857] has been reserved
[    0.324352] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.324356] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.324358] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.324361] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.324363] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.324365] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.324367] system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.324370] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.324523] pnp: PnP ACPI: found 9 devices
[    0.329213] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.329313] NET: Registered PF_INET protocol family
[    0.329513] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.333453] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.333485] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.333493] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.333781] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.334133] TCP: Hash tables configured (established 262144 bind 65536)
[    0.334163] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.334238] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.334334] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.334343] pci 0000:00:1b.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.334348] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.334353] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.334362] pci 0000:00:1b.0: bridge window [mem 0x3f800000-0x3f9fffff]: assigned
[    0.334367] pci 0000:00:1b.0: bridge window [mem 0x4010000000-0x40101fffff 64bit pref]: assigned
[    0.334371] pci 0000:00:1b.0: bridge window [io  0x5000-0x5fff]: assigned
[    0.334375] pci 0000:00:1b.0: PCI bridge to [bus 01]
[    0.334384] pci 0000:00:1b.0:   bridge window [io  0x5000-0x5fff]
[    0.334390] pci 0000:00:1b.0:   bridge window [mem 0x3f800000-0x3f9fffff]
[    0.334394] pci 0000:00:1b.0:   bridge window [mem 0x4010000000-0x40101fffff 64bit pref]
[    0.334400] pci 0000:00:1d.0: PCI bridge to [bus 02]
[    0.334405] pci 0000:00:1d.0:   bridge window [mem 0x42100000-0x421fffff]
[    0.334411] pci 0000:00:1d.5: PCI bridge to [bus 03]
[    0.334416] pci 0000:00:1d.5:   bridge window [mem 0x42000000-0x420fffff]
[    0.334424] pci 0000:00:1d.7: PCI bridge to [bus 04-08]
[    0.334426] pci 0000:00:1d.7:   bridge window [io  0x3000-0x3fff]
[    0.334431] pci 0000:00:1d.7:   bridge window [mem 0x41000000-0x41ffffff]
[    0.334435] pci 0000:00:1d.7:   bridge window [mem 0x40000000-0x40ffffff 64bit pref]
[    0.334441] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.334444] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.334446] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.334448] pci_bus 0000:00: resource 7 [mem 0x3f800000-0xdfffffff window]
[    0.334451] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
[    0.334453] pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window]
[    0.334455] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.334457] pci_bus 0000:01: resource 1 [mem 0x3f800000-0x3f9fffff]
[    0.334460] pci_bus 0000:01: resource 2 [mem 0x4010000000-0x40101fffff 64bit pref]
[    0.334462] pci_bus 0000:02: resource 1 [mem 0x42100000-0x421fffff]
[    0.334464] pci_bus 0000:03: resource 1 [mem 0x42000000-0x420fffff]
[    0.334466] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.334468] pci_bus 0000:04: resource 1 [mem 0x41000000-0x41ffffff]
[    0.334470] pci_bus 0000:04: resource 2 [mem 0x40000000-0x40ffffff 64bit pref]
[    0.336424] PCI: CLS 64 bytes, default 64
[    0.336432] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.336434] software IO TLB: mapped [mem 0x0000000032d77000-0x0000000036d77000] (64MB)
[    0.336470] Unpacking initramfs...
[    0.336576] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    0.336581] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    0.336584] RAPL PMU: hw unit of domain package 2^-14 Joules
[    0.336587] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    0.336590] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    0.336592] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    0.349470] Initialise system trusted keyrings
[    0.349505] workingset: timestamp_bits=38 max_order=23 bucket_order=0
[    0.349635] fuse: init (API version 7.39)
[    0.379191] NET: Registered PF_ALG protocol family
[    0.379198] Key type asymmetric registered
[    0.379201] Asymmetric key parser 'x509' registered
[    0.379204] Asymmetric key parser 'pkcs8' registered
[    0.379220] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.379231] io scheduler bfq registered
[    0.379689] pcieport 0000:00:1b.0: PME: Signaling with IRQ 120
[    0.379739] pcieport 0000:00:1b.0: pciehp: Slot #20 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    0.380080] pcieport 0000:00:1d.0: PME: Signaling with IRQ 121
[    0.380371] pcieport 0000:00:1d.5: PME: Signaling with IRQ 122
[    0.380671] pcieport 0000:00:1d.7: PME: Signaling with IRQ 123
[    0.380714] pcieport 0000:00:1d.7: pciehp: Slot #15 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    0.382190] ACPI: AC: AC Adapter [AC] (on-line)
[    0.382274] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.382321] ACPI: button: Power Button [PWRB]
[    0.382370] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.382410] ACPI: button: Sleep Button [SLPB]
[    0.382458] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.382496] ACPI: button: Lid Switch [LID0]
[    0.382548] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.382591] ACPI: button: Power Button [PWRF]
[    0.385144] ACPI: \_TZ_.TZ0_: _AL0 evaluation failure
[    0.385336] thermal LNXTHERM:00: registered as thermal_zone0
[    0.385341] ACPI: thermal: Thermal Zone [TZ0] (47 C)
[    0.385633] Non-volatile memory driver v1.3
[    0.386204] ACPI: battery: Slot [BAT0] (battery present)
[    0.387999] loop: module loaded
[    0.388357] ahci 0000:00:17.0: version 3.0
[    0.388497] nvme nvme0: pci function 0000:02:00.0
[    0.388569] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
[    0.388607] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x31 impl SATA mode
[    0.388614] ahci 0000:00:17.0: flags: 64bit ncq sntf stag pm clo only pio slum part ems sxs deso sadm sds apst 
[    0.400933] nvme nvme0: 7/0/0 default/read/poll queues
[    0.408100] scsi host0: ahci
[    0.408397] scsi host1: ahci
[    0.408648] scsi host2: ahci
[    0.408867] scsi host3: ahci
[    0.409001] scsi host4: ahci
[    0.409129] scsi host5: ahci
[    0.409171] ata1: SATA max UDMA/133 abar m2048@0x42233000 port 0x42233100 irq 124 lpm-pol 0
[    0.409174] ata2: DUMMY
[    0.409176] ata3: DUMMY
[    0.409177] ata4: DUMMY
[    0.409178] ata5: SATA max UDMA/133 abar m2048@0x42233000 port 0x42233300 irq 124 lpm-pol 0
[    0.409181] ata6: SATA max UDMA/133 abar m2048@0x42233000 port 0x42233380 irq 124 lpm-pol 0
[    0.409239] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[    0.409241] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    0.409248] tun: Universal TUN/TAP device driver, 1.6
[    0.409415] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.409422] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.410504] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    0.410701] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.410705] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.410709] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.410938] hub 1-0:1.0: USB hub found
[    0.410960] hub 1-0:1.0: 16 ports detected
[    0.412919] hub 2-0:1.0: USB hub found
[    0.412936] hub 2-0:1.0: 8 ports detected
[    0.413969] usbcore: registered new interface driver usb-storage
[    0.413986] usbcore: registered new interface driver usbserial_generic
[    0.413992] usbserial: USB Serial support registered for generic
[    0.413997] usbcore: registered new interface driver usb_serial_simple
[    0.414002] usbserial: USB Serial support registered for carelink
[    0.414006] usbserial: USB Serial support registered for flashloader
[    0.414011] usbserial: USB Serial support registered for funsoft
[    0.414015] usbserial: USB Serial support registered for google
[    0.414020] usbserial: USB Serial support registered for hp4x
[    0.414024] usbserial: USB Serial support registered for kaufmann
[    0.414028] usbserial: USB Serial support registered for libtransistor
[    0.414032] usbserial: USB Serial support registered for moto_modem
[    0.414036] usbserial: USB Serial support registered for motorola_tetra
[    0.414040] usbserial: USB Serial support registered for nokia
[    0.414044] usbserial: USB Serial support registered for novatel_gps
[    0.414048] usbserial: USB Serial support registered for siemens_mpi
[    0.414053] usbserial: USB Serial support registered for suunto
[    0.414057] usbserial: USB Serial support registered for vivopay
[    0.414061] usbserial: USB Serial support registered for zio
[    0.414100] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.724330] ata1: SATA link down (SStatus 0 SControl 300)
[    1.042851] Freeing initrd memory: 4972K
[    1.043703]  nvme0n1: p1 p2 < p5 p6 p7 p8 >
[    1.045311] i8042: Detected active multiplexing controller, rev 1.1
[    1.048851] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.048857] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.048889] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.048909] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.048928] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.049122] rtc_cmos 00:03: RTC can wake from S4
[    1.050212] rtc_cmos 00:03: registered as rtc0
[    1.050238] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
[    1.050252] i2c_dev: i2c /dev entries driver
[    1.050411] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    1.050444] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    1.050663] i2c i2c-0: 2/2 memory slots populated (from DMI)
[    1.051008] i2c i2c-0: Successfully instantiated SPD at 0x50
[    1.051877] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.052303] intel_pstate: Intel P-state driver initializing
[    1.053326] intel_pstate: Disabling energy efficiency optimization
[    1.053328] intel_pstate: HWP enabled
[    1.053572] usbcore: registered new interface driver usbhid
[    1.053575] usbhid: USB HID core driver
[    1.053639] intel_pmc_core intel_pmc_core.0:  initialized
[    1.054214] intel_rapl_common: Found RAPL domain package
[    1.054218] intel_rapl_common: Found RAPL domain core
[    1.054220] intel_rapl_common: Found RAPL domain uncore
[    1.054222] intel_rapl_common: Found RAPL domain dram
[    1.054223] intel_rapl_common: Found RAPL domain psys
[    1.055546] NET: Registered PF_PACKET protocol family
[    1.055554] Key type dns_resolver registered
[    1.056817] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    1.057345] microcode: Current revision: 0x000000b0
[    1.057934] IPI shorthand broadcast: enabled
[    1.057939] AVX2 version of gcm_enc/dec engaged.
[    1.058118] AES CTR mode by8 optimization enabled
[    1.059344] sched_clock: Marking stable (1053751106, 4167536)->(1073718310, -15799668)
[    1.059437] Loading compiled-in X.509 certificates
[    1.061312] clk: Disabling unused clocks
[    1.061316] ALSA device list:
[    1.061317]   No soundcards found.
[    1.268086] usb 2-8: new SuperSpeed USB device number 2 using xhci_hcd
[    1.291359] hub 2-8:1.0: USB hub found
[    1.291881] hub 2-8:1.0: 4 ports detected
[    1.344259] tsc: Refined TSC clocksource calibration: 2111.978 MHz
[    1.344278] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e7163c74c0, max_idle_ns: 440795247061 ns
[    1.344357] clocksource: Switched to clocksource tsc
[    1.359165] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.359905] ata5.00: supports DRM functions and may not be fully accessible
[    1.359916] ata5.00: ATA-11: Samsung SSD 870 QVO 8TB, SVQ02B6Q, max UDMA/133
[    1.360684] ata5.00: 15628053168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.364520] ata5.00: Features: Trust Dev-Sleep NCQ-sndrcv
[    1.365176] ata5.00: supports DRM functions and may not be fully accessible
[    1.370107] ata5.00: configured for UDMA/133
[    1.370343] scsi 4:0:0:0: Direct-Access     ATA      Samsung SSD 870  2B6Q PQ: 0 ANSI: 5
[    1.370763] ata5.00: Enabling discard_zeroes_data
[    1.370784] sd 4:0:0:0: [sda] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[    1.370806] sd 4:0:0:0: [sda] Write Protect is off
[    1.370813] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.370856] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.370911] sd 4:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    1.371080] ata5.00: Enabling discard_zeroes_data
[    1.385809]  sda: sda1
[    1.385965] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.407721] usb 1-10: new full-speed USB device number 2 using xhci_hcd
[    1.562589] usbhid 1-10:1.2: couldn't find an input interrupt endpoint
[    1.684370] usb 1-11: new full-speed USB device number 3 using xhci_hcd
[    1.685098] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.685569] ata6.00: supports DRM functions and may not be fully accessible
[    1.685575] ata6.00: ATA-11: Samsung SSD 870 QVO 8TB, SVQ02B6Q, max UDMA/133
[    1.686359] ata6.00: 15628053168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.689891] ata6.00: Features: Trust Dev-Sleep NCQ-sndrcv
[    1.690511] ata6.00: supports DRM functions and may not be fully accessible
[    1.694348] ata6.00: configured for UDMA/133
[    1.694495] scsi 5:0:0:0: Direct-Access     ATA      Samsung SSD 870  2B6Q PQ: 0 ANSI: 5
[    1.694713] ata6.00: Enabling discard_zeroes_data
[    1.694726] sd 5:0:0:0: [sdb] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[    1.694737] sd 5:0:0:0: [sdb] Write Protect is off
[    1.694741] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.694755] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.694782] sd 5:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[    1.694870] ata6.00: Enabling discard_zeroes_data
[    1.708004]  sdb: sdb1
[    1.708081] sd 5:0:0:0: [sdb] Attached SCSI disk
[    1.776606] Freeing unused kernel image (initmem) memory: 1244K
[    1.777719] Write protecting the kernel read-only data: 14336k
[    1.778302] Freeing unused kernel image (rodata/data gap) memory: 1556K
[    1.778308] Run /init as init process
[    1.778310]   with arguments:
[    1.778311]     /init
[    1.778311]   with environment:
[    1.778312]     HOME=/
[    1.778313]     TERM=linux
[    1.778313]     BOOT_IMAGE=/boot/kernel-next
[    1.837623] systemd-udevd[264]: starting version 3.2.9
[    1.838632] udevd[265]: starting eudev-3.2.9
[    1.970878] usb 1-12: new high-speed USB device number 4 using xhci_hcd
[    2.113565] hub 1-12:1.0: USB hub found
[    2.113905] hub 1-12:1.0: 4 ports detected
[    2.237539] usb 1-13: new high-speed USB device number 5 using xhci_hcd
[    2.391077] hub 1-13:1.0: USB hub found
[    2.392522] hub 1-13:1.0: 4 ports detected
[    2.454215] usb 1-12.2: new high-speed USB device number 6 using xhci_hcd
[    2.534511] psmouse serio2: synaptics: queried max coordinates: x [..5674], y [..4764]
[    2.545463] hub 1-12.2:1.0: USB hub found
[    2.545525] hub 1-12.2:1.0: 4 ports detected
[    2.655864] psmouse serio2: synaptics: queried min coordinates: x [1266..], y [1086..]
[    2.655873] psmouse serio2: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
[    2.667548] usb 1-14: new full-speed USB device number 7 using xhci_hcd
[    2.813638] psmouse serio2: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00223/0x840300/0x26800/0x0, board id: 3189, fw id: 2302754
[    2.859380] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
[    2.881059] usb 1-12.3: new high-speed USB device number 8 using xhci_hcd
[    2.974895] hub 1-12.3:1.0: USB hub found
[    2.975033] hub 1-12.3:1.0: 4 ports detected
[    3.161058] usb 1-12.2.4: new full-speed USB device number 9 using xhci_hcd
[    3.377357] hub 1-12.2.4:1.0: USB hub found
[    3.378411] hub 1-12.2.4:1.0: 4 ports detected
[    3.423948] EXT4-fs (nvme0n1p5): mounted filesystem 406b35b0-e601-44d6-94e2-364c3133af7c ro with ordered data mode. Quota mode: disabled.
[    3.463840] EXT4-fs (nvme0n1p5): unmounting filesystem 406b35b0-e601-44d6-94e2-364c3133af7c.
[    3.487617] dracut: Checking ext4: /dev/disk/by-label/SYS_ROOT
[    3.487973] dracut: issuing e2fsck -a  /dev/disk/by-label/SYS_ROOT
[    3.496735] dracut: SYS_ROOT: clean, 299947/1048576 files, 1080929/4194304 blocks
[    3.500279] dracut: Mounting /dev/disk/by-label/SYS_ROOT with -o noatime,discard
[    3.506895] EXT4-fs (nvme0n1p5): mounted filesystem 406b35b0-e601-44d6-94e2-364c3133af7c r/w with ordered data mode. Quota mode: disabled.
[    3.528706] dracut: Mounted root filesystem /dev/nvme0n1p5
[    3.593261] dracut: Switching root
[    3.677545] usb 1-12.3.1: new full-speed USB device number 10 using xhci_hcd
[    3.830756] input: Cherry GmbH Wireless Dongle Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12.3/1-12.3.1/1-12.3.1:1.0/0003:046A:0702.0001/input/input13
[    3.830852] input: Cherry GmbH Wireless Dongle as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12.3/1-12.3.1/1-12.3.1:1.0/0003:046A:0702.0001/input/input14
[    3.830892] hid-generic 0003:046A:0702.0001: input: USB HID v1.11 Mouse [Cherry GmbH Wireless Dongle] on usb-0000:00:14.0-12.3.1/input0
[    3.897556] usb 1-12.2.4.1: new full-speed USB device number 11 using xhci_hcd
[    4.019060] input: TaiYiLian LE502 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12.2/1-12.2.4/1-12.2.4.1/1-12.2.4.1:1.0/0003:0A12:4007.0002/input/input15
[    4.074479] input: TaiYiLian LE502 as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12.2/1-12.2.4/1-12.2.4.1/1-12.2.4.1:1.0/0003:0A12:4007.0002/input/input16
[    4.074662] hid-generic 0003:0A12:4007.0002: input: USB HID v1.11 Device [TaiYiLian LE502] on usb-0000:00:14.0-12.2.4.1/input0
[    4.078624] hid-generic 0003:0A12:4007.0003: device has no listeners, quitting
[    4.114229] usb 1-12.3.2: new full-speed USB device number 12 using xhci_hcd
[    4.268390] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12.3/1-12.3.2/1-12.3.2:1.0/0003:046D:C318.0004/input/input17
[    4.324311] hid-generic 0003:046D:C318.0004: input: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:14.0-12.3.2/input0
[    4.326706] input: Logitech Logitech Illuminated Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12.3/1-12.3.2/1-12.3.2:1.1/0003:046D:C318.0005/input/input18
[    4.381022] hid-generic 0003:046D:C318.0005: input: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:14.0-12.3.2/input1
[    5.295213] input: Intel HID events as /devices/platform/INT33D5:00/input/input20
[    5.316669] ACPI: bus type drm_connector registered
[    5.319482] e1000e: Intel(R) PRO/1000 Network Driver
[    5.319484] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    5.320049] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    5.336480] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.338994] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.339303] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    5.344109] Intel(R) Wireless WiFi driver for Linux
[    5.344438] snd_hda_intel 0000:00:1f.3: probe_mask set to 0x105 for device 1558:0351
[    5.344444] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x5
[    5.349464] iwlwifi 0000:03:00.0: Detected crf-id 0x400410, cnv-id 0x400410 wfpm id 0x80000000
[    5.349486] iwlwifi 0000:03:00.0: PCI dev 2725/0024, rev=0x420, rfid=0x10d000
[    5.350041] snd_hda_intel 0000:00:1f.3: probe_mask set to 0x105 for device 1558:0351
[    5.350047] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x5
[    5.351154] iwlwifi 0000:03:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.41
[    5.351604] iwlwifi 0000:03:00.0: loaded firmware version 86.fb5c9aeb.0 ty-a0-gf-a0-86.ucode op_mode iwlmvm
[    5.360429] snd_hda_intel 0000:00:1f.3: probe_mask set to 0x105 for device 1558:0351
[    5.360433] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x5
[    5.363115] Setting dangerous option mitigations - tainting kernel
[    5.363118] Setting dangerous option enable_guc - tainting kernel
[    5.364156] i915 0000:00:02.0: vgaarb: deactivate vga console
[    5.365405] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.366733] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    5.366939] snd_hda_intel 0000:00:1f.3: probe_mask set to 0x105 for device 1558:0351
[    5.366943] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x5
[    5.370353] iwlwifi 0000:03:00.0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420
[    5.370437] thermal thermal_zone3: failed to read out thermal zone (-61)
[    5.377863] iwlwifi 0000:03:00.0: WRT: Invalid buffer destination
[    5.414487] usbcore: registered new interface driver snd-usb-audio
[    5.414620] snd_hda_intel 0000:00:1f.3: probe_mask set to 0x105 for device 1558:0351
[    5.414625] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x5
[    5.537848] iwlwifi 0000:03:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20
[    5.537886] iwlwifi 0000:03:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[    5.537901] iwlwifi 0000:03:00.0: WFPM_AUTH_KEY_0: 0x90
[    5.537925] iwlwifi 0000:03:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[    5.538790] iwlwifi 0000:03:00.0: loaded PNVM version e28bb9d7
[    5.551027] EXT4-fs (nvme0n1p5): re-mounted 406b35b0-e601-44d6-94e2-364c3133af7c r/w. Quota mode: disabled.
[    5.554558] iwlwifi 0000:03:00.0: Detected RF GF, rfid=0x10d000
[    5.625077] iwlwifi 0000:03:00.0: base HW address: 64:49:7d:e4:52:41
[    5.634990] EXT4-fs (nvme0n1p6): mounted filesystem d71c25bd-bcc3-48c7-a184-7180d49b04a9 r/w with ordered data mode. Quota mode: disabled.
[    5.637979] EXT4-fs (nvme0n1p7): mounted filesystem 8f675286-59b2-4d9a-b662-e942bf2beead r/w with ordered data mode. Quota mode: disabled.
[    5.639883] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 80:fa:5b:74:d0:4a
[    5.639887] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[    5.639946] iwlwifi 0000:03:00.0: WBRF is not supported
[    5.639973] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
[    5.640161] snd_hda_intel 0000:00:1f.3: probe_mask set to 0x105 for device 1558:0351
[    5.640165] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x5
[    5.657723] EXT4-fs (nvme0n1p8): mounted filesystem 7104b128-42f5-4502-8743-305c8a18a115 r/w with ordered data mode. Quota mode: disabled.
[    5.728083] EXT4-fs (sda1): mounted filesystem c8ac054f-85ab-467a-8d6e-1023010b0843 r/w with ordered data mode. Quota mode: disabled.
[    5.847832] EXT4-fs (sdb1): mounted filesystem f5d982b7-fa5a-48ff-b699-a6fb6ba7ab2e r/w with ordered data mode. Quota mode: disabled.
[    5.975883] elogind-daemon[1158]: Watching system buttons on /dev/input/event3 (Power Button)
[    5.975897] elogind-daemon[1158]: Watching system buttons on /dev/input/event0 (Power Button)
[    5.976021] elogind-daemon[1158]: Watching system buttons on /dev/input/event2 (Lid Switch)
[    5.976034] elogind-daemon[1158]: Watching system buttons on /dev/input/event1 (Sleep Button)
[    5.976134] elogind-daemon[1158]: Watching system buttons on /dev/input/event10 (Logitech Logitech Illuminated Keyboard)
[    5.976148] elogind-daemon[1158]: Watching system buttons on /dev/input/event11 (Logitech Logitech Illuminated Keyboard Consumer Control)
[    5.976166] elogind-daemon[1158]: Watching system buttons on /dev/input/event12 (Intel HID events)
[    5.976184] elogind-daemon[1158]: Watching system buttons on /dev/input/event4 (AT Translated Set 2 keyboard)
[    5.976288] elogind-daemon[1158]: New seat seat0.
[    7.008796] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[    7.008802] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[    7.033444] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[    7.033448] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[    7.033450] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[    7.047826] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0
[    7.050185] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    7.050324] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21
[    7.050488] i915 display info: display version: 9
[    7.050492] i915 display info: cursor_needs_physical: no
[    7.050494] i915 display info: has_cdclk_crawl: no
[    7.050496] i915 display info: has_cdclk_squash: no
[    7.050497] i915 display info: has_ddi: yes
[    7.050499] i915 display info: has_dp_mst: yes
[    7.050500] i915 display info: has_dsb: no
[    7.050501] i915 display info: has_fpga_dbg: yes
[    7.050503] i915 display info: has_gmch: no
[    7.050504] i915 display info: has_hotplug: yes
[    7.050505] i915 display info: has_hti: no
[    7.050507] i915 display info: has_ipc: yes
[    7.050508] i915 display info: has_overlay: no
[    7.050509] i915 display info: has_psr: yes
[    7.050510] i915 display info: has_psr_hw_tracking: yes
[    7.050512] i915 display info: overlay_needs_physical: no
[    7.050513] i915 display info: supports_tv: no
[    7.050514] i915 display info: has_hdcp: yes
[    7.050515] i915 display info: has_dmc: yes
[    7.050517] i915 display info: has_dsc: no
[    7.050655] snd_hda_intel 0000:00:1f.3: probe_mask set to 0x105 for device 1558:0351
[    7.050661] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x5
[    7.109057] fbcon: i915drmfb (fb0) is primary device
[    7.108998] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    7.131631] Console: switching to colour frame buffer device 240x67
[    7.150055] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    7.152998] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    7.153003] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.153006] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    7.153008] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    7.153009] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[    7.153010] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    7.153011] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    7.153013] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    7.175363] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[    7.175434] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[    7.175499] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[    7.175560] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[    7.175620] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[    8.127622] iwlwifi 0000:03:00.0: WRT: Invalid buffer destination
[    8.283349] iwlwifi 0000:03:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20
[    8.283387] iwlwifi 0000:03:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[    8.283415] iwlwifi 0000:03:00.0: WFPM_AUTH_KEY_0: 0x90
[    8.283438] iwlwifi 0000:03:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[    8.430145] iwlwifi 0000:03:00.0: WRT: Invalid buffer destination
[    8.585890] iwlwifi 0000:03:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20
[    8.585928] iwlwifi 0000:03:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[    8.585951] iwlwifi 0000:03:00.0: WFPM_AUTH_KEY_0: 0x90
[    8.585979] iwlwifi 0000:03:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[    9.001034] ahci 0000:00:17.0: port does not support device sleep
[    9.001074] ahci 0000:00:17.0: port does not support device sleep
[   10.736942] e1000e 0000:00:1f.6 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   12.286438] iwlwifi 0000:03:00.0: WRT: Invalid buffer destination
[   12.442264] iwlwifi 0000:03:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20
[   12.442304] iwlwifi 0000:03:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[   12.442332] iwlwifi 0000:03:00.0: WFPM_AUTH_KEY_0: 0x90
[   12.442359] iwlwifi 0000:03:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[   12.649417] wlan0: authenticate with dc:39:6f:0c:fa:2f (local address=64:49:7d:e4:52:41)
[   12.650280] wlan0: send auth to dc:39:6f:0c:fa:2f (try 1/3)
[   12.683864] wlan0: authenticated
[   12.684205] wlan0: associate with dc:39:6f:0c:fa:2f (try 1/3)
[   12.687770] wlan0: RX AssocResp from dc:39:6f:0c:fa:2f (capab=0x1511 status=0 aid=1)
[   12.696690] wlan0: associated
[   12.984770] wlan0: Limiting TX power to 27 (30 - 3) dBm as advertised by dc:39:6f:0c:fa:2f
[   13.977245] e1000e 0000:00:1f.6 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   18.548006] elogind-daemon[1158]: New session c1 of user root.
[   18.594716] smpboot: CPU 8 is now offline
[   18.622062] IRQ fixup: irq 145 move in progress, old vector 34
[   18.623137] smpboot: CPU 9 is now offline
[   18.643491] smpboot: CPU 10 is now offline
[   18.662404] IRQ fixup: irq 147 move in progress, old vector 34
[   18.663480] smpboot: CPU 11 is now offline
[   18.687312] smpboot: CPU 12 is now offline
[   18.706832] smpboot: CPU 13 is now offline
[   18.726777] smpboot: CPU 14 is now offline
[   18.752766] smpboot: CPU 15 is now offline
[   32.368217] wlan0: deauthenticating from dc:39:6f:0c:fa:2f by local choice (Reason: 3=DEAUTH_LEAVING)
[   35.447713] warning: `conky' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[   39.255141] elogind-daemon[1158]: Lid closed.
[  342.791015] usb 1-13.4: new high-speed USB device number 13 using xhci_hcd
[  385.238528] elogind-daemon[1158]: Lid opened.
[  388.843724] iwlwifi 0000:03:00.0: WRT: Invalid buffer destination
[  389.004717] iwlwifi 0000:03:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20
[  389.004758] iwlwifi 0000:03:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[  389.004785] iwlwifi 0000:03:00.0: WFPM_AUTH_KEY_0: 0x90
[  389.004819] iwlwifi 0000:03:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[  389.172027] iwlwifi 0000:03:00.0: WRT: Invalid buffer destination
[  389.333106] iwlwifi 0000:03:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20
[  389.333157] iwlwifi 0000:03:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[  389.333185] iwlwifi 0000:03:00.0: WFPM_AUTH_KEY_0: 0x90
[  389.333209] iwlwifi 0000:03:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[  393.075485] iwlwifi 0000:03:00.0: WRT: Invalid buffer destination
[  393.232285] iwlwifi 0000:03:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20
[  393.232334] iwlwifi 0000:03:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[  393.232359] iwlwifi 0000:03:00.0: WFPM_AUTH_KEY_0: 0x90
[  393.232382] iwlwifi 0000:03:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[  393.435322] wlan0: authenticate with dc:39:6f:0c:fa:2f (local address=64:49:7d:e4:52:41)
[  393.436079] wlan0: send auth to dc:39:6f:0c:fa:2f (try 1/3)
[  393.469562] wlan0: authenticated
[  393.470856] wlan0: associate with dc:39:6f:0c:fa:2f (try 1/3)
[  393.474373] wlan0: RX AssocResp from dc:39:6f:0c:fa:2f (capab=0x1511 status=0 aid=1)
[  393.484253] wlan0: associated
[  393.717942] wlan0: Limiting TX power to 27 (30 - 3) dBm as advertised by dc:39:6f:0c:fa:2f
[  397.258193] wlan0: deauthenticating from dc:39:6f:0c:fa:2f by local choice (Reason: 3=DEAUTH_LEAVING)
[  399.113285] usb 1-13.4: USB disconnect, device number 13
[  405.434614] elogind-daemon[1158]: Suspend key pressed short.
[  405.441213] elogind-daemon[1158]: Suspending...
[  405.461022] smpboot: Booting Node 0 Processor 8 APIC 0x1
[  405.479077] smpboot: Booting Node 0 Processor 9 APIC 0x3
[  405.496023] smpboot: Booting Node 0 Processor 10 APIC 0x5
[  405.512431] smpboot: Booting Node 0 Processor 11 APIC 0x7
[  405.525705] smpboot: Booting Node 0 Processor 12 APIC 0x9
[  405.538139] smpboot: Booting Node 0 Processor 13 APIC 0xb
[  405.551131] smpboot: Booting Node 0 Processor 14 APIC 0xd
[  405.563206] smpboot: Booting Node 0 Processor 15 APIC 0xf
[  405.577154] elogind-daemon[1158]: Entering sleep state 'suspend'...
[  405.577163] PM: suspend entry (deep)
[  405.604434] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x10000 action 0x6
[  405.604446] ata5.00: waking up from sleep
[  405.604452] ata5: hard resetting link
[  405.914655] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  405.917977] ata5.00: supports DRM functions and may not be fully accessible
[  405.923133] ata5.00: supports DRM functions and may not be fully accessible
[  405.926844] ata5.00: configured for UDMA/133
[  405.926856] ata5.00: retrying FLUSH 0xea Emask 0x0
[  405.937382] ahci 0000:00:17.0: port does not support device sleep
[  405.937537] ata5: EH complete
[  405.937697] ata5.00: Enabling discard_zeroes_data
[  405.957770] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x10000 action 0x6
[  405.957782] ata6.00: waking up from sleep
[  405.957789] ata6: hard resetting link
[  406.268029] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  406.271636] ata6.00: supports DRM functions and may not be fully accessible
[  406.276700] ata6.00: supports DRM functions and may not be fully accessible
[  406.280337] ata6.00: configured for UDMA/133
[  406.280347] ata6.00: retrying FLUSH 0xea Emask 0x0
[  406.290858] ahci 0000:00:17.0: port does not support device sleep
[  406.291021] ata6: EH complete
[  406.291177] ata6.00: Enabling discard_zeroes_data
[  406.291216] Filesystems sync: 0.714 seconds
[  406.291293] Freezing user space processes
[  406.292945] Freezing user space processes completed (elapsed 0.001 seconds)
[  406.292952] OOM killer disabled.
[  406.292954] Freezing remaining freezable tasks
[  406.294202] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[  406.294238] printk: Suspending console(s) (use no_console_suspend to debug)
[  406.344458] sd 4:0:0:0: [sda] Synchronizing SCSI cache
[  406.344561] sd 5:0:0:0: [sdb] Synchronizing SCSI cache
[  407.024447] ata6.00: Entering standby power mode
[  407.024686] ata5.00: Entering standby power mode
[  407.024744] e1000e: EEE TX LPI TIMER: 00000011
[  407.344853] ACPI: EC: interrupt blocked
[  407.369354] ACPI: PM: Preparing to enter system sleep state S3
[  407.373644] ACPI: EC: event blocked
[  407.373648] ACPI: EC: EC stopped
[  407.373649] ACPI: PM: Saving platform NVS memory
[  407.373708] Disabling non-boot CPUs ...
[  407.375523] smpboot: CPU 1 is now offline
[  407.379732] smpboot: CPU 2 is now offline
[  407.381795] smpboot: CPU 3 is now offline
[  407.384721] smpboot: CPU 4 is now offline
[  407.387977] smpboot: CPU 5 is now offline
[  407.390879] smpboot: CPU 6 is now offline
[  407.393787] smpboot: CPU 7 is now offline
[  407.396224] smpboot: CPU 8 is now offline
[  407.399144] smpboot: CPU 9 is now offline
[  407.400849] smpboot: CPU 10 is now offline
[  407.402585] smpboot: CPU 11 is now offline
[  407.404425] smpboot: CPU 12 is now offline
[  407.406271] smpboot: CPU 13 is now offline
[  407.408077] smpboot: CPU 14 is now offline
[  407.409879] smpboot: CPU 15 is now offline
[  407.412908] ACPI: PM: Low-level resume complete
[  407.412951] ACPI: EC: EC started
[  407.412952] ACPI: PM: Restoring platform NVS memory
[  407.413871] Enabling non-boot CPUs ...
[  407.413894] smpboot: Booting Node 0 Processor 1 APIC 0x2
[  407.415035] CPU1 is up
[  407.415052] smpboot: Booting Node 0 Processor 2 APIC 0x4
[  407.416125] CPU2 is up
[  407.416141] smpboot: Booting Node 0 Processor 3 APIC 0x6
[  407.417217] CPU3 is up
[  407.417230] smpboot: Booting Node 0 Processor 4 APIC 0x8
[  407.418308] CPU4 is up
[  407.418323] smpboot: Booting Node 0 Processor 5 APIC 0xa
[  407.419421] CPU5 is up
[  407.419435] smpboot: Booting Node 0 Processor 6 APIC 0xc
[  407.420557] CPU6 is up
[  407.420571] smpboot: Booting Node 0 Processor 7 APIC 0xe
[  407.421724] CPU7 is up
[  407.421738] smpboot: Booting Node 0 Processor 8 APIC 0x1
[  407.422993] CPU8 is up
[  407.423011] smpboot: Booting Node 0 Processor 9 APIC 0x3
[  407.424070] CPU9 is up
[  407.424085] smpboot: Booting Node 0 Processor 10 APIC 0x5
[  407.425150] CPU10 is up
[  407.425166] smpboot: Booting Node 0 Processor 11 APIC 0x7
[  407.426238] CPU11 is up
[  407.426251] smpboot: Booting Node 0 Processor 12 APIC 0x9
[  407.427339] CPU12 is up
[  407.427352] smpboot: Booting Node 0 Processor 13 APIC 0xb
[  407.428445] CPU13 is up
[  407.428459] smpboot: Booting Node 0 Processor 14 APIC 0xd
[  407.429581] CPU14 is up
[  407.429594] smpboot: Booting Node 0 Processor 15 APIC 0xf
[  407.430743] CPU15 is up
[  407.437241] ACPI: PM: Waking up from system sleep state S3
[  407.440175] ACPI: button: The lid device is not compliant to SW_LID.
[  407.446906] ACPI: EC: interrupt unblocked
[  407.450873] ACPI: EC: event unblocked
[  407.453698] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1
[  407.453703] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0
[  407.476787] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
[  407.476790] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
[  407.476792] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
[  407.477682] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
[  407.477686] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[  407.477689] i915 0000:00:02.0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[  407.477692] i915 0000:00:02.0: [drm] [ENCODER:121:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
[  407.477694] i915 0000:00:02.0: [drm] [ENCODER:125:DDI E/PHY E] is disabled/in DSI mode with an ungated DDI clock, gate it
[  407.754438] usb 1-14: reset full-speed USB device number 7 using xhci_hcd
[  407.793872] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  407.794006] ata1: SATA link down (SStatus 0 SControl 300)
[  407.794168] ata6.00: supports DRM functions and may not be fully accessible
[  407.794395] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  407.794705] ata5.00: supports DRM functions and may not be fully accessible
[  407.798010] ata6.00: supports DRM functions and may not be fully accessible
[  407.798698] ata5.00: supports DRM functions and may not be fully accessible
[  407.801695] ata6.00: configured for UDMA/133
[  407.802606] ata5.00: configured for UDMA/133
[  407.811796] ahci 0000:00:17.0: port does not support device sleep
[  407.811941] ata6.00: Enabling discard_zeroes_data
[  407.812730] ahci 0000:00:17.0: port does not support device sleep
[  407.812885] ata5.00: Enabling discard_zeroes_data
[  408.017745] usb 1-10: reset full-speed USB device number 2 using xhci_hcd
[  408.194627] nvme nvme0: 7/0/0 default/read/poll queues
[  408.562952] OOM killer enabled.
[  408.562954] Restarting tasks ... done.
[  408.563550] thermal thermal_zone3: failed to read out thermal zone (-61)
[  408.563979] PM: suspend exit
[  408.564000] elogind-daemon[1158]: System returned from sleep state.
[  408.579004] psmouse serio2: synaptics: queried max coordinates: x [..5674], y [..4764]
[  408.685911] smpboot: CPU 8 is now offline
[  408.712071] smpboot: CPU 9 is now offline
[  408.752644] smpboot: CPU 10 is now offline
[  408.785985] psmouse serio2: synaptics: queried min coordinates: x [1266..], y [1086..]
[  408.872529] smpboot: CPU 11 is now offline
[  408.902214] smpboot: CPU 12 is now offline
[  408.952291] smpboot: CPU 13 is now offline
[  408.992260] smpboot: CPU 14 is now offline
[  409.032267] smpboot: CPU 15 is now offline
[  409.233376] e1000e 0000:00:1f.6 eth0: NIC Link is Down
[  412.050617] e1000e 0000:00:1f.6 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[  415.200453] e1000e 0000:00:1f.6 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[  421.630945] usb 1-13.4: new full-speed USB device number 14 using xhci_hcd
[  421.994436] usb 1-13.4: new high-speed USB device number 15 using xhci_hcd