3D Benchy teal config

# generated by PrusaSlicer 2.5.0+win64 on 2023-02-07 at 14:11:07 UTC
avoid_crossing_perimeters = 1
avoid_crossing_perimeters_max_detour = 0
bed_custom_model = 
bed_custom_texture = 
bed_shape = 0x0,220x0,220x220,0x220
bed_temperature = 50
before_layer_gcode = ; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm\nG92 E0
between_objects_gcode = 
bottom_fill_pattern = monotonic
bottom_solid_layers = 4
bottom_solid_min_thickness = 0
bridge_acceleration = 0
bridge_angle = 0
bridge_fan_speed = 100
bridge_flow_ratio = 0.7
bridge_speed = 25
brim_separation = 0
brim_type = outer_only
brim_width = 0
clip_multipart_objects = 1
color_change_gcode = M600
colorprint_heights = 
compatible_printers_condition_cummulative = "printer_model==\"KOBRA\" and nozzle_diameter[0]==0.4";"printer_model==\"KOBRA\""
complete_objects = 0
cooling = 1
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_acceleration = 0
default_filament_profile = "Anycubic PLA @MEGA0"
default_print_profile = 0.20mm - Kobra (0.4mm Nozzle)
deretract_speed = 40
disable_fan_first_layers = 1
dont_support_bridges = 1
draft_shield = disabled
duplicate_distance = 6
elefant_foot_compensation = 0.3
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
end_gcode = ; BEGIN END GCODE\n\n; turn off heat to nozzle/bed\nM104 S0\nM140 S0\n\n; relative E\nM83\n\n;Retract the filament\nG1 E-1 F2400\n\n; absolute E\nM82\n\n; try to move up from the print ~2mm\n; cap it versus Prusaslicer's idea of the end stops, until we fix the firmware limits w/ the z height mod\nG0 Z{ min(max_print_height, max_layer_z+2)} F3000\n\n; move the head to the left, print bed forward\nG0 X-30 Y180 F6000\n\n; try to move up from the print ~50 mm (2 inch)\n; cap it versus Prusaslicer's idea of the end stops, until we fix the firmware limits w/ the z height mod\nG0 Z{min(max_print_height, max_layer_z+50)} F3000\n\n; motors off\nM84\n; FINISH END GCODE
ensure_vertical_shell_thickness = 1
external_perimeter_extrusion_width = 0.45
external_perimeter_speed = 15
external_perimeters_first = 0
extra_loading_move = -2
extra_perimeters = 0
extruder_clearance_height = 22
extruder_clearance_radius = 75
extruder_colour = #FFFF00
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 0.98
extrusion_width = 0.45
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #6ee4e1
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 22
filament_density = 1.24
filament_deretract_speed = nil
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 15
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 0.2
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_settings_id = "Polymaker PLA - Teal"
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_type = PLA
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_vendor = Generic
filament_wipe = nil
fill_angle = 45
fill_density = 10%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_acceleration_over_raft = 0
first_layer_bed_temperature = 60
first_layer_extrusion_width = 0.42
first_layer_height = 0.2
first_layer_speed = 20
first_layer_speed_over_raft = 30
first_layer_temperature = 205
full_fan_speed_layer = 0
fuzzy_skin = none
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 1
gap_fill_speed = 30
gcode_comments = 0
gcode_flavor = marlin2
gcode_label_objects = 0
gcode_resolution = 0.0125
gcode_substitutions = 
high_current_on_filament_swap = 0
host_type = octoprint
infill_acceleration = 0
infill_anchor = 600%
infill_anchor_max = 50
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 50
inherits_cummulative = "0.20mm NORMAL @MEGA0";"Generic PLA @MEGA0";"Anycubic Mega Zero"
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_gcode = ; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm
layer_height = 0.2
machine_limits_usage = time_estimate_only
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 500
machine_max_acceleration_retracting = 500
machine_max_acceleration_travel = 1500,1250
machine_max_acceleration_x = 500
machine_max_acceleration_y = 500
machine_max_acceleration_z = 100
machine_max_feedrate_e = 25
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 5
machine_max_jerk_e = 5
machine_max_jerk_x = 10
machine_max_jerk_y = 10
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_fan_speed = 100
max_layer_height = 0.32
max_print_height = 200
max_print_speed = 100
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 11.5
min_bead_width = 85%
min_fan_speed = 100
min_feature_size = 25%
min_layer_height = 0.1
min_print_speed = 15
min_skirt_length = 4
mmu_segmented_region_max_width = 0
notes = 
nozzle_diameter = 0.4
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{initial_filament_type}.gcode
overhangs = 1
parking_pos_retraction = 92
pause_print_gcode = M601
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
perimeter_generator = arachne
perimeter_speed = 40
perimeters = 2
physical_printer_settings_id = Octoprint
post_process = "C:\\git\\cad-stuff\\prusaslicer\\scripts\\PrusaSkewCorrection.bat"
print_host = 
print_settings_id = 0.20mm - Kobra (0.4mm Nozzle)
printer_model = KOBRA
printer_notes = Dec. 22, 2022 -Max Print Height is actually 250 but I changed it to 200 as I am working on the dual Z axis mod and I don't want to crash the machine.
printer_settings_id = Anycubic Kobra (0.4mm Nozzle)
printer_technology = FFF
printer_variant = 0.4
printer_vendor = 
printhost_apikey = 
printhost_cafile = 
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 3
raft_layers = 0
remaining_times = 0
resolution = 0
retract_before_travel = 2
retract_before_wipe = 70%
retract_layer_change = 0
retract_length = 0.8
retract_length_toolchange = 1
retract_lift = 0.4
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 40
seam_position = aligned
silent_mode = 0
single_extruder_multi_material = 0
single_extruder_multi_material_priming = 1
skirt_distance = 4
skirt_height = 1
skirts = 3
slice_closing_radius = 0.049
slicing_mode = regular
slowdown_below_layer_time = 20
small_perimeter_speed = 15
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
solid_infill_speed = 40
spiral_vase = 0
standby_temperature_delta = -5
start_filament_gcode = "; Filament gcode\n"
start_gcode = ; BEGIN START GCODE\n; AnyCubic Kobra Prusaslicer Start G-Code\n\n\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM82 ; absolute extruder\n\nM140 S[first_layer_bed_temperature]  ; Start heating bed\nM104 S160; Start heating extruder to no-drip temp\n\nG28 X ; Move extruder off of bed\n\nM190 S[first_layer_bed_temperature]  ; Wait for bed to get up to temperature\nM109 S160; Wait for extruder to get up to no-drip temp\n\nG92 E0 ; Reset Extruder\nG28 ; Home all axes while at no drip temp\n\nG0 Z0.3 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG0 X0.1 Y20 F5000.0 ; Move to start position\n\nM104 S[first_layer_temperature]; Heat extruder to final temp\nM109 S[first_layer_temperature]; Wait for extruder to get up to temperature\n\n\nG1 X0.1 Y90 F1500.0 E9 ; Draw the first line\nG1 X3 Y90 F1500.0 E9.37 ; Move to side a little\nG1 X3 Y20 F1500.0 E18.37 ; Draw the second line\nG0 Z2 F1500\nG0 Z0.1 X6 F1500\nG0 Z[first_layer_height]\n\n; reset extruder position\nG92 E0\n\n; FINISH START GCODE
support_material = 0
support_material_angle = 0
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.15
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_extrusion_width = 0.38
support_material_interface_contact_loops = 0
support_material_interface_extruder = 0
support_material_interface_layers = 2
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 40
support_material_style = grid
support_material_synchronize_layers = 0
support_material_threshold = 45
support_material_with_sheath = 0
support_material_xy_spacing = 60%
temperature = 200
template_custom_gcode = 
thick_bridges = 0
thin_walls = 0
threads = 8
thumbnails = 
thumbnails_format = PNG
toolchange_gcode = 
top_fill_pattern = monotonic
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 30
top_solid_layers = 5
top_solid_min_thickness = 0
travel_speed = 120
travel_speed_z = 0
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wall_distribution_count = 1
wall_transition_angle = 10
wall_transition_filter_deviation = 25%
wall_transition_length = 100%
wipe = 1
wipe_into_infill = 0
wipe_into_objects = 0
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 170
wipe_tower_y = 140
wiping_volumes_extruders = 70,70
wiping_volumes_matrix = 0
xy_size_compensation = 0
z_offset = 0