$ SDCARD_PRINT_FILE FILENAME="Test_Cube.gcode"
File opened:Test_Cube.gcode Size:1048755
File selected
// Before PRINT_START
// After PRINT_START
// Set and Wait for Temps
// Set z hight for first layer
// Before TIMELAPSE_TAKE_FRAME
$ SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=False
!! Move out of range: -0.013 -0.013 0.200 [-12.500]
!! Move out of range: -0.013 -0.013 0.200 [-12.500]