orion06boot

🧩 Syntax:
dmesg
[    0.000000] Booting Linux on physical CPU 0x0000000a00 [0x410fd811]
[    0.000000] Linux version 6.14.0-rc4-ARCH+ (root@ansalon) (aarch64-linux-gnu-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43) #48 SMP PREEMPT_DYNAMIC Sat Mar  1 11:13:05 AEDT 2025
[    0.000000] earlycon: pl11 at MMIO 0x00000000040d0000 (options '')
[    0.000000] printk: legacy bootconsole [pl11] enabled
[    0.000000] efi: EFI v2.7 by EDK II
[    0.000000] efi: ACPI 2.0=0x7f9c30018 SMBIOS=0xfffd0000 SMBIOS 3.0=0x7febf0000 MEMATTR=0x7fc55a018 INITRD=0x7f9c45a98 MEMRESERVE=0x7f9c45d18 
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000007F9C30018 000024 (v02 CIXTEK)
[    0.000000] ACPI: XSDT 0x00000007F9C3FE98 000074 (v01 CIXTEK SKY1EDK2 01000101      01000013)
[    0.000000] ACPI: FACP 0x00000007F9C3FC98 00010C (v05 CIXTEK SKY1EDK2 01000101 CIX  00000001)
[    0.000000] ACPI: DSDT 0x00000007F9C10018 012C20 (v05 CIXTEK SKY1EDK2 00000001 INTL 20200925)
[    0.000000] ACPI: SSDT 0x00000007F9C37518 002FCA (v05 CIXTEK SKY1EDK2 00000001 INTL 20200925)
[    0.000000] ACPI: CSRT 0x00000007F9C3FA98 00008C (v00 CIXTEK SKY1EDK2 01000101 CIX  00000001)
[    0.000000] ACPI: DBG2 0x00000007F9C3FB98 00005C (v00 CIXTEK SKY1EDK2 01000101 CIX  00000001)
[    0.000000] ACPI: GTDT 0x00000007F9C3E998 000084 (v03 CIXTEK SKY1EDK2 01000101 CIX  00000001)
[    0.000000] ACPI: IORT 0x00000007F9C3BD18 000AD8 (v05 CIXTEK SKY1EDK2 01000101 CIX  00000001)
[    0.000000] ACPI: SDEI 0x00000007F9C3FE18 000024 (v01 CIXTEK SKY1EDK2 01000101 CIX  00000001)
[    0.000000] ACPI: APIC 0x00000007F9C3EA98 000428 (v05 CIXTEK SKY1EDK2 01000101 CIX  00000001)
[    0.000000] ACPI: SSDT 0x00000007F9C3CE18 0011FC (v02 CIXTEK SKY1EDK2 01000101 CIX  00000001)
[    0.000000] ACPI: MCFG 0x00000007F9C3F918 00003C (v01 CIXTEK SKY1EDK2 01000101 CIX  00000001)
[    0.000000] ACPI: Use ACPI SPCR as default console: Yes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000080000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000807fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x00000000843fffff]
[    0.000000]   node   0: [mem 0x0000000084400000-0x00000000845fffff]
[    0.000000]   node   0: [mem 0x0000000085000000-0x000000009fffffff]
[    0.000000]   node   0: [mem 0x00000000a0000000-0x00000000a7ffffff]
[    0.000000]   node   0: [mem 0x00000000a8000000-0x00000000fffbffff]
[    0.000000]   node   0: [mem 0x00000000fffc0000-0x00000000fffeffff]
[    0.000000]   node   0: [mem 0x00000000ffff0000-0x00000000ffffdfff]
[    0.000000]   node   0: [mem 0x00000000ffffe000-0x00000000ffffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000007fe4effff]
[    0.000000]   node   0: [mem 0x00000007fe4f0000-0x00000007fedeffff]
[    0.000000]   node   0: [mem 0x00000007fedf0000-0x00000007ffffffff]
[    0.000000]   node   0: [mem 0x0000008000000000-0x000000807fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000807fffffff]
[    0.000000] On node 0, zone DMA: 2560 pages in unavailable ranges
[    0.000000] cma: Reserved 64 MiB at 0x00000000fbe00000 on node -1
[    0.000000] psci: probing for conduit method from ACPI.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 24 pages/cpu s60760 r8192 d29352 u98304
[    0.000000] pcpu-alloc: s60760 r8192 d29352 u98304 alloc=24*4096
[    0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 
[    0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: Address authentication (architected QARMA3 algorithm)
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: HCRX_EL2 register
[    0.000000] CPU features: detected: Virtualization Host Extensions
[    0.000000] CPU features: detected: Memory Tagging Extension
[    0.000000] CPU features: detected: Asymmetric MTE Tag Check Fault
[    0.000000] CPU features: detected: Spectre-v4
[    0.000000] CPU features: detected: SSBS not fully self-synchronizing
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: BOOT_IMAGE=/Image root=/dev/sda2 rw loglevel=3 quiet console=ttyAMA2,115200 earlycon=pl011,0x040d0000
[    0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/Image", will be passed to user space.
[    0.000000] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
[    0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 8386048
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 16.
[    0.000000] software IO TLB: mapped [mem 0x00000000f7e00000-0x00000000fbe00000] (64MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[    0.000000] Dynamic Preempt: full
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=12.
[    0.000000] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=12.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GIC: enabling workaround for GICv3: ARM64 erratum 2941627
[    0.000000] GICv3: 512 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs, DirectLPI
[    0.000000] GICv3: GICv4 features: DirectLPI RVPEID Valid+Dirty 
[    0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=1
[    0.000000] GICv3: CPU0: found redistributor a00 region 0:0x000000000e310000
[    0.000000] ITS [mem 0x0e050000-0x0e06ffff]
[    0.000000] ITS@0x000000000e050000: Single VMOVP capable
[    0.000000] ITS@0x000000000e050000: Using GICv4.1 mode 00000000 00000001
[    0.000000] ITS@0x000000000e050000: allocated 8192 Devices @1000a0000 (indirect, esz 8, psz 64K, shr 1)
[    0.000000] ITS@0x000000000e050000: allocated 32768 Interrupt Collections @1000b0000 (flat, esz 2, psz 64K, shr 1)
[    0.000000] ITS@0x000000000e050000: allocated 8192 Virtual CPUs @1000c0000 (flat, esz 8, psz 64K, shr 1)
[    0.000000] GICv3: using LPI property table @0x00000001000d0000
[    0.000000] ITS: Using DirectLPI for VPE invalidation
[    0.000000] ITS: Enabling GICv4 support
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000001000e0000
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 1000.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns
[    0.000143] Console: colour dummy device 80x25
[    0.000162] ACPI: Core revision 20240827
[    0.000728] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=1000000)
[    0.000732] pid_max: default: 32768 minimum: 301
[    0.001419] LSM: initializing lsm=capability,yama,landlock
[    0.002268] Yama: becoming mindful.
[    0.002330] landlock: Up and running.
[    0.002629] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.002648] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.003469] ACPI PPTT: No PPTT table found, CPU and cache topology may be inaccurate
[    0.003476] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.007160] rcu: Hierarchical SRCU implementation.
[    0.007163] rcu:     Max phase no-delay instances is 400.
[    0.007240] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[    0.007618] Remapping and enabling EFI services.
[    0.009053] smp: Bringing up secondary CPUs ...
[    0.017995] CPU features: detected: ARM errata 2966298, 3117295
[    0.018006] Detected PIPT I-cache on CPU1
[    0.018018] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR1_EL1. Boot CPU: 0x1001111010312122, CPU1: 0x1001111011312122
[    0.018029] CPU features: Unsupported CPU feature variation detected.
[    0.018039] GICv3: CPU1: found redistributor 0 region 0:0x000000000e090000
[    0.018051] GICv3: CPU1: using allocated LPI pending table @0x00000001000f0000
[    0.018080] CPU1: Booted secondary processor 0x0000000000 [0x410fd801]
[    0.026958] Detected PIPT I-cache on CPU2
[    0.026972] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR1_EL1. Boot CPU: 0x1001111010312122, CPU2: 0x1001111011312122
[    0.026986] GICv3: CPU2: found redistributor 100 region 0:0x000000000e0d0000
[    0.026998] GICv3: CPU2: using allocated LPI pending table @0x0000000100100000
[    0.027023] CPU2: Booted secondary processor 0x0000000100 [0x410fd801]
[    0.036947] Detected PIPT I-cache on CPU3
[    0.036961] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR1_EL1. Boot CPU: 0x1001111010312122, CPU3: 0x1001111011312122
[    0.036978] GICv3: CPU3: found redistributor 200 region 0:0x000000000e110000
[    0.036989] GICv3: CPU3: using allocated LPI pending table @0x0000000100110000
[    0.037014] CPU3: Booted secondary processor 0x0000000200 [0x410fd801]
[    0.046003] Detected PIPT I-cache on CPU4
[    0.046016] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR1_EL1. Boot CPU: 0x1001111010312122, CPU4: 0x1001111011312122
[    0.046032] GICv3: CPU4: found redistributor 300 region 0:0x000000000e150000
[    0.046044] GICv3: CPU4: using allocated LPI pending table @0x0000000100120000
[    0.046069] CPU4: Booted secondary processor 0x0000000300 [0x410fd801]
[    0.054971] Detected PIPT I-cache on CPU5
[    0.054985] GICv3: CPU5: found redistributor 400 region 0:0x000000000e190000
[    0.054992] GICv3: CPU5: using allocated LPI pending table @0x0000000100130000
[    0.055009] CPU5: Booted secondary processor 0x0000000400 [0x410fd811]
[    0.063993] Detected PIPT I-cache on CPU6
[    0.064009] GICv3: CPU6: found redistributor 500 region 0:0x000000000e1d0000
[    0.064017] GICv3: CPU6: using allocated LPI pending table @0x0000000100140000
[    0.064036] CPU6: Booted secondary processor 0x0000000500 [0x410fd811]
[    0.073042] Detected PIPT I-cache on CPU7
[    0.073059] GICv3: CPU7: found redistributor 600 region 0:0x000000000e210000
[    0.073067] GICv3: CPU7: using allocated LPI pending table @0x0000000100150000
[    0.073084] CPU7: Booted secondary processor 0x0000000600 [0x410fd811]
[    0.082058] Detected PIPT I-cache on CPU8
[    0.082074] GICv3: CPU8: found redistributor 700 region 0:0x000000000e250000
[    0.082082] GICv3: CPU8: using allocated LPI pending table @0x0000000100160000
[    0.082100] CPU8: Booted secondary processor 0x0000000700 [0x410fd811]
[    0.091076] Detected PIPT I-cache on CPU9
[    0.091092] GICv3: CPU9: found redistributor 800 region 0:0x000000000e290000
[    0.091100] GICv3: CPU9: using allocated LPI pending table @0x0000000100170000
[    0.091116] CPU9: Booted secondary processor 0x0000000800 [0x410fd811]
[    0.100088] Detected PIPT I-cache on CPU10
[    0.100107] GICv3: CPU10: found redistributor 900 region 0:0x000000000e2d0000
[    0.100115] GICv3: CPU10: using allocated LPI pending table @0x0000000100180000
[    0.100134] CPU10: Booted secondary processor 0x0000000900 [0x410fd811]
[    0.109284] Detected PIPT I-cache on CPU11
[    0.109303] GICv3: CPU11: found redistributor b00 region 0:0x000000000e350000
[    0.109311] GICv3: CPU11: using allocated LPI pending table @0x0000000100190000
[    0.109329] CPU11: Booted secondary processor 0x0000000b00 [0x410fd811]
[    0.109417] smp: Brought up 1 node, 12 CPUs
[    0.109428] SMP: Total of 12 processors activated.
[    0.109430] CPU: All CPU(s) started at EL2
[    0.109432] CPU features: detected: Branch Target Identification
[    0.109457] CPU features: detected: ARMv8.4 Translation Table Level
[    0.109459] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.109460] CPU features: detected: Common not Private translations
[    0.109461] CPU features: detected: CRC32 instructions
[    0.109462] CPU features: detected: Data cache clean to Point of Deep Persistence
[    0.109463] CPU features: detected: Data cache clean to Point of Persistence
[    0.109464] CPU features: detected: Data independent timing control (DIT)
[    0.109465] CPU features: detected: E0PD
[    0.109467] CPU features: detected: Enhanced Counter Virtualization
[    0.109468] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF)
[    0.109469] CPU features: detected: Enhanced Privileged Access Never
[    0.109470] CPU features: detected: Enhanced Virtualization Traps
[    0.109471] CPU features: detected: Fine Grained Traps
[    0.109472] CPU features: detected: Generic authentication (architected QARMA3 algorithm)
[    0.109474] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.109475] CPU features: detected: LSE atomic instructions
[    0.109476] CPU features: detected: Privileged Access Never
[    0.109477] CPU features: detected: RAS Extension Support
[    0.109478] CPU features: detected: Speculation barrier (SB)
[    0.109479] CPU features: detected: Stage-2 Force Write-Back
[    0.109480] CPU features: detected: TLB range maintenance instructions
[    0.109481] CPU features: detected: WFx with timeout
[    0.109483] CPU features: detected: Memory Partitioning And Monitoring
[    0.109484] CPU features: detected: Memory Partitioning And Monitoring Virtualisation
[    0.109485] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.109486] CPU features: detected: Scalable Vector Extension
[    0.109533] alternatives: applying system-wide alternatives
[    0.111272] CPU features: detected: Activity Monitors Unit (AMU) on CPU0-11
[    0.111279] CPU features: detected: Hardware dirty bit management on CPU0-11
[    0.111281] SVE: maximum available vector length 16 bytes per vector
[    0.111283] SVE: default vector length 16 bytes per vector
[    0.111416] Memory: 32469116K/33544192K available (20288K kernel code, 4414K rwdata, 11360K rodata, 2496K init, 723K bss, 998408K reserved, 65536K cma-reserved)
[    0.112449] devtmpfs: initialized
[    0.112927] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.112934] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.113364] 22880 pages in range for non-PLT usage
[    0.113368] 514400 pages in range for PLT usage
[    0.113599] pinctrl core: initialized pinctrl subsystem
[    0.113937] SMBIOS 3.0.0 present.
[    0.113942] DMI: Radxa Computer (Shenzhen) Co., Ltd. Radxa Orion O6/Radxa Orion O6, BIOS 1.0 Jan  1 1980
[    0.113961] DMI: Memory slots populated: 4/4
[    0.115378] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.115917] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.116107] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.116301] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.116326] audit: initializing netlink subsys (disabled)
[    0.116399] audit: type=2000 audit(0.115:1): state=initialized audit_enabled=0 res=1
[    0.116592] thermal_sys: Registered thermal governor 'fair_share'
[    0.116595] thermal_sys: Registered thermal governor 'bang_bang'
[    0.116596] thermal_sys: Registered thermal governor 'step_wise'
[    0.116598] thermal_sys: Registered thermal governor 'user_space'
[    0.116599] thermal_sys: Registered thermal governor 'power_allocator'
[    0.116620] cpuidle: using governor ladder
[    0.116625] cpuidle: using governor menu
[    0.116680] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.116893] ASID allocator initialised with 65536 entries
[    0.117167] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.117467] Serial: AMBA PL011 UART driver
[    0.117979] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.117983] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[    0.117985] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[    0.117987] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[    0.117988] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.117989] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[    0.117991] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[    0.117992] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[    0.118179] cryptd: max_cpu_qlen set to 1000
[    0.135339] raid6: neonx8   gen() 10078 MB/s
[    0.152362] raid6: neonx4   gen() 10088 MB/s
[    0.169390] raid6: neonx2   gen()  9640 MB/s
[    0.186418] raid6: neonx1   gen()  8525 MB/s
[    0.203444] raid6: int64x8  gen()  5629 MB/s
[    0.220474] raid6: int64x4  gen()  5572 MB/s
[    0.237501] raid6: int64x2  gen()  4605 MB/s
[    0.254524] raid6: int64x1  gen()  3656 MB/s
[    0.254525] raid6: using algorithm neonx4 gen() 10088 MB/s
[    0.271550] raid6: .... xor() 7803 MB/s, rmw enabled
[    0.271553] raid6: using neon recovery algorithm
[    0.271682] ACPI: Added _OSI(Module Device)
[    0.271684] ACPI: Added _OSI(Processor Device)
[    0.271685] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.271687] ACPI: Added _OSI(Processor Aggregator Device)
[    0.280086] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.284315] ACPI: Interpreter enabled
[    0.284319] ACPI: Using GIC for interrupt routing
[    0.284336] ACPI: MCFG table detected, 1 entries
[    0.287741] ACPI: \_SB_.ADSS.ACLK.PPRS: New power resource
[    0.292837] ACPI: \_SB_.VPU0.PPRS: New power resource
[    0.293017] ACPI: \_SB_.VPU0.CRE0.PRS0: New power resource
[    0.293104] ACPI: \_SB_.VPU0.CRE1.PRS1: New power resource
[    0.293195] ACPI: \_SB_.VPU0.CRE2.PRS2: New power resource
[    0.293280] ACPI: \_SB_.VPU0.CRE3.PRS3: New power resource
[    0.294818] ACPI: \_SB_.DPU0.PRS0: New power resource
[    0.295039] ACPI: \_SB_.DPU1.PRS1: New power resource
[    0.295277] ACPI: \_SB_.DPU2.PRS2: New power resource
[    0.295496] ACPI: \_SB_.DPU3.PRS3: New power resource
[    0.295719] ACPI: \_SB_.DPU4.PRS4: New power resource
[    0.296423] ACPI: \_SB_.GPU_.PPRS: New power resource
[    0.296630] ACPI: \_SB_.NPU0.PPRS: New power resource
[    0.296751] ACPI: \_SB_.NPU0.CRE0.PRS0: New power resource
[    0.296856] ACPI: \_SB_.NPU0.CRE1.PRS1: New power resource
[    0.296951] ACPI: \_SB_.NPU0.CRE2.PRS2: New power resource
[    0.301823] ACPI: \_SB_.ISPM.PRS0: New power resource
[    0.318918] ACPI: \_SB_.ECFN: New power resource
[    0.326512] ARMH0011:00: ttyAMA0 at MMIO 0x40b0000 (irq = 21, base_baud = 0) is a SBSA
[    0.327725] ACPI: [Firmware Bug]: Device [CRE0] status [0000000e]: not present and enabled
[    0.327732] ACPI: [Firmware Bug]: Device [CRE1] status [0000000e]: not present and enabled
[    0.327737] ACPI: [Firmware Bug]: Device [CRE2] status [0000000e]: not present and enabled
[    0.327743] ACPI: [Firmware Bug]: Device [CRE3] status [0000000e]: not present and enabled
[    0.337965] ARMH0011:01: ttyAMA1 at MMIO 0x40c0000 (irq = 22, base_baud = 0) is a SBSA
[    0.339116] ACPI: [Firmware Bug]: Device [CRE0] status [0000000e]: not present and enabled
[    0.339122] ACPI: [Firmware Bug]: Device [CRE1] status [0000000e]: not present and enabled
[    0.339127] ACPI: [Firmware Bug]: Device [CRE2] status [0000000e]: not present and enabled
[    0.339131] ACPI: [Firmware Bug]: Device [CRE3] status [0000000e]: not present and enabled
[    0.349134] ARMH0011:02: ttyAMA2 at MMIO 0x40d0000 (irq = 23, base_baud = 0) is a SBSA
[    0.349142] printk: legacy console [ttyAMA2] enabled
[    0.349144] printk: legacy bootconsole [pl11] disabled
[    0.356627] ACPI: [Firmware Bug]: Device [CRE0] status [0000000e]: not present and enabled
[    0.356655] ACPI: [Firmware Bug]: Device [CRE1] status [0000000e]: not present and enabled
[    0.356677] ACPI: [Firmware Bug]: Device [CRE2] status [0000000e]: not present and enabled
[    0.356699] ACPI: [Firmware Bug]: Device [CRE3] status [0000000e]: not present and enabled
[    0.389489] ACPI: PCI Root Bridge [PCI4] (domain 0000 [bus 00-1f])
[    0.389521] acpi PNP0A08:04: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.389750] acpi PNP0A08:04: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER LTR DPC]
[    0.390118] acpi PNP0A08:04: _OSC: OS now controls [PCIeCapability]
[    0.394536] acpi PNP0A08:04: ECAM area [mem 0x20000000-0x21ffffff] reserved by PNP0C02:00
[    0.394566] acpi PNP0A08:04: ECAM at [mem 0x20000000-0x21ffffff] for [bus 00-1f]
[    0.394782] PCI host bridge to bus 0000:00
[    0.394803] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff window]
[    0.394815] pci_bus 0000:00: root bus resource [mem 0x800000000-0xbffffffff window]
[    0.394826] pci_bus 0000:00: root bus resource [bus 00-1f]
[    0.394873] pci 0000:00:00.0: [17cd:0100] type 01 class 0x060400 PCIe Root Port
[    0.394911] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.394926] pci 0000:00:00.0:   bridge window [mem 0x30000000-0x300fffff]
[    0.395130] pci 0000:00:00.0: supports D1
[    0.395141] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.395221] pci 0000:00:00.0: PTM enabled (root), 2ns granularity
[    0.395657] pci 0000:01:00.0: [10ec:8126] type 00 class 0x020000 PCIe Endpoint
[    0.395734] pci 0000:01:00.0: BAR 0 [io  0x0000-0x00ff]
[    0.395749] pci 0000:01:00.0: BAR 2 [mem 0x30000000-0x3000ffff 64bit]
[    0.395763] pci 0000:01:00.0: BAR 4 [mem 0x30010000-0x30013fff 64bit]
[    0.395933] pci 0000:01:00.0: supports D1 D2
[    0.395941] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.402227] pci_bus 0000:00: on NUMA node 0
[    0.402258] pci 0000:00:00.0: bridge window [mem 0x30000000-0x300fffff]: assigned
[    0.402275] pci 0000:01:00.0: BAR 2 [mem 0x30000000-0x3000ffff 64bit]: assigned
[    0.402299] pci 0000:01:00.0: BAR 4 [mem 0x30010000-0x30013fff 64bit]: assigned
[    0.402319] pci 0000:01:00.0: BAR 0 [io  size 0x0100]: can't assign; no space
[    0.402327] pci 0000:01:00.0: BAR 0 [io  size 0x0100]: failed to assign
[    0.402337] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.402349] pci 0000:00:00.0:   bridge window [mem 0x30000000-0x300fffff]
[    0.402362] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
[    0.402369] pci_bus 0000:00: resource 4 [mem 0x30000000-0x37ffffff window]
[    0.402376] pci_bus 0000:00: resource 5 [mem 0x800000000-0xbffffffff window]
[    0.402383] pci_bus 0000:01: resource 1 [mem 0x30000000-0x300fffff]
[    0.402403] pci 0000:00:00.0: Max Payload Size set to  512/ 512 (was  512), Max Read Rq  512
[    0.402426] pci 0000:01:00.0: Max Payload Size set to  512/ 512 (was  512), Max Read Rq  512
[    0.403908] platform CIXH2020:04: failed to claim resource 11: [io  0x30100000-0x301fffff window]
[    0.412869] acpi CIXH2020:04: platform device creation failed: -16
[    0.420524] ACPI: [Firmware Bug]: Device [CRE0] status [0000000e]: not present and enabled
[    0.420585] ACPI: [Firmware Bug]: Device [CRE1] status [0000000e]: not present and enabled
[    0.420644] ACPI: [Firmware Bug]: Device [CRE2] status [0000000e]: not present and enabled
[    0.420700] ACPI: [Firmware Bug]: Device [CRE3] status [0000000e]: not present and enabled
[    0.461816] ACPI: CPU0 has been hot-added
[    0.461943] ACPI: CPU1 has been hot-added
[    0.462084] ACPI: CPU2 has been hot-added
[    0.462204] ACPI: CPU3 has been hot-added
[    0.462347] ACPI: CPU4 has been hot-added
[    0.462468] ACPI: CPU5 has been hot-added
[    0.462606] ACPI: CPU6 has been hot-added
[    0.462752] ACPI: CPU7 has been hot-added
[    0.462913] ACPI: CPU8 has been hot-added
[    0.463056] ACPI: CPU9 has been hot-added
[    0.463181] ACPI: CPU10 has been hot-added
[    0.463322] ACPI: CPU11 has been hot-added
[    0.465727] iommu: Default domain type: Translated
[    0.465737] iommu: DMA domain TLB invalidation policy: strict mode
[    0.466911] SCSI subsystem initialized
[    0.467086] libata version 3.00 loaded.
[    0.467153] ACPI: bus type USB registered
[    0.467172] usbcore: registered new interface driver usbfs
[    0.467181] usbcore: registered new interface driver hub
[    0.467198] usbcore: registered new device driver usb
[    0.467465] pps_core: LinuxPPS API ver. 1 registered
[    0.467466] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.467470] PTP clock support registered
[    0.467750] EDAC MC: Ver: 3.0.0
[    0.467942] scmi_core: SCMI protocol bus registered
[    0.468011] efivars: Registered efivars operations
[    0.468354] FPGA manager framework
[    0.468385] Advanced Linux Sound Architecture Driver Initialized.
[    0.468682] NetLabel: Initializing
[    0.468684] NetLabel:  domain hash size = 128
[    0.468686] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.468703] NetLabel:  unlabeled traffic allowed by default
[    0.468814] vgaarb: loaded
[    0.468999] clocksource: Switched to clocksource arch_sys_counter
[    0.469222] VFS: Disk quotas dquot_6.6.0
[    0.469231] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.469511] pnp: PnP ACPI init
[    0.470288] system 00:00: [mem 0x20000000-0x2fffffff] has been reserved
[    0.480126] pnp: PnP ACPI: found 1 devices
[    0.487492] NET: Registered PF_INET protocol family
[    0.487596] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.491569] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.491607] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.491616] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.491888] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.492220] TCP: Hash tables configured (established 262144 bind 65536)
[    0.492417] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[    0.492582] UDP hash table entries: 16384 (order: 8, 1048576 bytes, linear)
[    0.492734] UDP-Lite hash table entries: 16384 (order: 8, 1048576 bytes, linear)
[    0.493026] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.493415] RPC: Registered named UNIX socket transport module.
[    0.493418] RPC: Registered udp transport module.
[    0.493419] RPC: Registered tcp transport module.
[    0.493421] RPC: Registered tcp-with-tls transport module.
[    0.493422] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.493432] PCI: CLS 0 bytes, default 64
[    0.493524] Trying to unpack rootfs image as initramfs...
[    0.499139] kvm [1]: nv: 566 coarse grained trap handlers
[    0.499292] kvm [1]: nv: 669 fine grained trap handlers
[    0.499420] kvm [1]: IPA Size Limit: 40 bits
[    0.499440] kvm [1]: GICv4 support disabled
[    0.499442] kvm [1]: GICv3: no GICV resource entry
[    0.499444] kvm [1]: disabling GICv2 emulation
[    0.499467] kvm [1]: GIC system register CPU interface enabled
[    0.499479] kvm [1]: vgic interrupt IRQ9
[    0.499506] kvm [1]: VHE mode initialized successfully
[    0.500757] Initialise system trusted keyrings
[    0.500965] workingset: timestamp_bits=46 max_order=23 bucket_order=0
[    0.500982] zbud: loaded
[    0.502917] NFS: Registering the id_resolver key type
[    0.502926] Key type id_resolver registered
[    0.502927] Key type id_legacy registered
[    0.502960] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.502966] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.502974] ntfs3: Read-only LZX/Xpress compression included
[    0.503194] SGI XFS with ACLs, security attributes, quota, no debug enabled
[    0.519694] NET: Registered PF_ALG protocol family
[    0.519702] xor: measuring software checksum speed
[    0.519945]    8regs           : 13582 MB/sec
[    0.520190]    32regs          : 13518 MB/sec
[    0.520366]    arm64_neon      : 18816 MB/sec
[    0.520367] xor: using function: arm64_neon (18816 MB/sec)
[    0.520371] Key type asymmetric registered
[    0.520373] Asymmetric key parser 'x509' registered
[    0.520452] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.520621] io scheduler mq-deadline registered
[    0.520624] io scheduler kyber registered
[    0.520673] io scheduler bfq registered
[    0.524950] ledtrig-cpu: registered to indicate activity on CPUs
[    0.525073] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.525584] IPMI message handler: version 39.2
[    0.534210] ACPI Warning: \_SB.AC._PSR: Missing expected return value (20240827/nsrepair-203)
[    0.534216] ACPI Warning: \_SB.AC._PSR: Expected return object of type Integer (20240827/nspredef-249)
[    0.534221] ACPI: \_SB_.AC__: Error reading AC Adapter state: AE_BAD_DATA
[    0.535573] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.535692] ACPI: button: Power Button [PWRB]
[    0.535862] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.535970] ACPI: button: Lid Switch [LID]
[    0.544284] thermal LNXTHERM:00: registered as thermal_zone0
[    0.544289] ACPI: thermal: Thermal Zone [TZ00] (41 C)
[    0.568104] thermal LNXTHERM:01: registered as thermal_zone1
[    0.568107] ACPI: thermal: Thermal Zone [ECTZ] (44 C)
[    0.568401] ACPI GTDT: found 1 SBSA generic Watchdog(s).
[    0.574056] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.575261] msm_serial: driver initialized
[    0.575821] arm-smmu-v3 arm-smmu-v3.0.auto: option mask 0x0
[    0.575847] arm-smmu-v3 arm-smmu-v3.0.auto: IDR0.HTTU features(0x600000) overridden by FW configuration (0x0)
[    0.575851] arm-smmu-v3 arm-smmu-v3.0.auto: ias 40-bit, oas 40-bit (features 0x0014dfbf)
[    0.576054] arm-smmu-v3 arm-smmu-v3.0.auto: allocated 65536 entries for cmdq
[    0.576163] arm-smmu-v3 arm-smmu-v3.0.auto: allocated 32768 entries for evtq
[    0.576292] arm-smmu-v3 arm-smmu-v3.0.auto: allocated 65536 entries for priq
[    0.576295] arm-smmu-v3 arm-smmu-v3.0.auto: 2-level strtab only covers 25/32 bits of SID
[    0.576465] arm-smmu-v3 arm-smmu-v3.0.auto: msi_domain absent - falling back to wired irqs
[    0.576733] ACPI: battery: Slot [BAT0] (battery absent)
[    0.576924] arm-smmu-v3 arm-smmu-v3.1.auto: option mask 0x0
[    0.576941] arm-smmu-v3 arm-smmu-v3.1.auto: IDR0.HTTU features(0x600000) overridden by FW configuration (0x0)
[    0.576944] arm-smmu-v3 arm-smmu-v3.1.auto: ias 40-bit, oas 40-bit (features 0x0014dfbf)
[    0.577132] arm-smmu-v3 arm-smmu-v3.1.auto: allocated 65536 entries for cmdq
[    0.577240] arm-smmu-v3 arm-smmu-v3.1.auto: allocated 32768 entries for evtq
[    0.577370] arm-smmu-v3 arm-smmu-v3.1.auto: allocated 65536 entries for priq
[    0.577372] arm-smmu-v3 arm-smmu-v3.1.auto: 2-level strtab only covers 25/32 bits of SID
[    0.577707] arm-smmu-v3 arm-smmu-v3.1.auto: msi_domain absent - falling back to wired irqs
[    0.578201] ACPI: bus type drm_connector registered
[    0.583639] xhci-hcd PNP0D10:00: xHCI Host Controller
[    0.583757] xhci-hcd PNP0D10:00: new USB bus registered, assigned bus number 1
[    0.583808] xhci-hcd PNP0D10:00: hcc params 0x08007f0d hci version 0x110 quirks 0x0000000000000010
[    0.583824] xhci-hcd PNP0D10:00: irq 75, io mem 0x09018000
[    0.583909] xhci-hcd PNP0D10:00: xHCI Host Controller
[    0.584037] xhci-hcd PNP0D10:00: new USB bus registered, assigned bus number 2
[    0.584041] xhci-hcd PNP0D10:00: Host supports USB 3.1 Enhanced SuperSpeed
[    0.584101] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    0.584104] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.584106] usb usb1: Product: xHCI Host Controller
[    0.584108] usb usb1: Manufacturer: Linux 6.14.0-rc4-ARCH+ xhci-hcd
[    0.584110] usb usb1: SerialNumber: PNP0D10:00
[    0.584382] hub 1-0:1.0: USB hub found
[    0.584391] hub 1-0:1.0: 1 port detected
[    0.584501] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.584526] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    0.584528] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.584530] usb usb2: Product: xHCI Host Controller
[    0.584532] usb usb2: Manufacturer: Linux 6.14.0-rc4-ARCH+ xhci-hcd
[    0.584534] usb usb2: SerialNumber: PNP0D10:00
[    0.584738] hub 2-0:1.0: USB hub found
[    0.584746] hub 2-0:1.0: 1 port detected
[    0.584907] xhci-hcd PNP0D10:02: xHCI Host Controller
[    0.585017] xhci-hcd PNP0D10:02: new USB bus registered, assigned bus number 3
[    0.585056] xhci-hcd PNP0D10:02: hcc params 0x08007f0d hci version 0x110 quirks 0x0000000000000010
[    0.585073] xhci-hcd PNP0D10:02: irq 76, io mem 0x090f8000
[    0.585147] xhci-hcd PNP0D10:02: xHCI Host Controller
[    0.585301] xhci-hcd PNP0D10:02: new USB bus registered, assigned bus number 4
[    0.585306] xhci-hcd PNP0D10:02: Host supports USB 3.1 Enhanced SuperSpeed
[    0.585341] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    0.585343] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.585345] usb usb3: Product: xHCI Host Controller
[    0.585347] usb usb3: Manufacturer: Linux 6.14.0-rc4-ARCH+ xhci-hcd
[    0.585348] usb usb3: SerialNumber: PNP0D10:02
[    0.585547] hub 3-0:1.0: USB hub found
[    0.585554] hub 3-0:1.0: 1 port detected
[    0.585647] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.585670] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    0.585671] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.585673] usb usb4: Product: xHCI Host Controller
[    0.585675] usb usb4: Manufacturer: Linux 6.14.0-rc4-ARCH+ xhci-hcd
[    0.585677] usb usb4: SerialNumber: PNP0D10:02
[    0.585871] hub 4-0:1.0: USB hub found
[    0.585878] hub 4-0:1.0: 1 port detected
[    0.586039] xhci-hcd PNP0D10:04: xHCI Host Controller
[    0.586144] xhci-hcd PNP0D10:04: new USB bus registered, assigned bus number 5
[    0.586183] xhci-hcd PNP0D10:04: hcc params 0x08007f0d hci version 0x110 quirks 0x0000000000000010
[    0.586197] xhci-hcd PNP0D10:04: irq 77, io mem 0x091d8000
[    0.586274] xhci-hcd PNP0D10:04: xHCI Host Controller
[    0.586390] xhci-hcd PNP0D10:04: new USB bus registered, assigned bus number 6
[    0.586396] xhci-hcd PNP0D10:04: Host supports USB 3.1 Enhanced SuperSpeed
[    0.586431] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    0.586433] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.586435] usb usb5: Product: xHCI Host Controller
[    0.586436] usb usb5: Manufacturer: Linux 6.14.0-rc4-ARCH+ xhci-hcd
[    0.586438] usb usb5: SerialNumber: PNP0D10:04
[    0.586658] hub 5-0:1.0: USB hub found
[    0.586665] hub 5-0:1.0: 1 port detected
[    0.586755] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.586777] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    0.586779] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.586781] usb usb6: Product: xHCI Host Controller
[    0.586782] usb usb6: Manufacturer: Linux 6.14.0-rc4-ARCH+ xhci-hcd
[    0.586783] usb usb6: SerialNumber: PNP0D10:04
[    0.586976] hub 6-0:1.0: USB hub found
[    0.586983] hub 6-0:1.0: 1 port detected
[    0.587138] xhci-hcd PNP0D10:05: xHCI Host Controller
[    0.587242] xhci-hcd PNP0D10:05: new USB bus registered, assigned bus number 7
[    0.587318] xhci-hcd PNP0D10:05: hcc params 0x08007f0d hci version 0x110 quirks 0x0000000000000010
[    0.587335] xhci-hcd PNP0D10:05: irq 78, io mem 0x091e8000
[    0.587408] xhci-hcd PNP0D10:05: xHCI Host Controller
[    0.587505] xhci-hcd PNP0D10:05: new USB bus registered, assigned bus number 8
[    0.587508] xhci-hcd PNP0D10:05: Host supports USB 3.1 Enhanced SuperSpeed
[    0.587550] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    0.587552] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.587553] usb usb7: Product: xHCI Host Controller
[    0.587555] usb usb7: Manufacturer: Linux 6.14.0-rc4-ARCH+ xhci-hcd
[    0.587556] usb usb7: SerialNumber: PNP0D10:05
[    0.587754] hub 7-0:1.0: USB hub found
[    0.587762] hub 7-0:1.0: 1 port detected
[    0.587849] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.587871] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
[    0.587874] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.587875] usb usb8: Product: xHCI Host Controller
[    0.587877] usb usb8: Manufacturer: Linux 6.14.0-rc4-ARCH+ xhci-hcd
[    0.587878] usb usb8: SerialNumber: PNP0D10:05
[    0.588102] hub 8-0:1.0: USB hub found
[    0.588109] hub 8-0:1.0: 1 port detected
[    0.588255] xhci-hcd PNP0D10:06: xHCI Host Controller
[    0.588354] xhci-hcd PNP0D10:06: new USB bus registered, assigned bus number 9
[    0.588389] xhci-hcd PNP0D10:06: USB3 root hub has no ports
[    0.588392] xhci-hcd PNP0D10:06: hcc params 0x08000f8d hci version 0x110 quirks 0x0000000000000010
[    0.588405] xhci-hcd PNP0D10:06: irq 79, io mem 0x09268000
[    0.588506] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    0.588509] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.588510] usb usb9: Product: xHCI Host Controller
[    0.588512] usb usb9: Manufacturer: Linux 6.14.0-rc4-ARCH+ xhci-hcd
[    0.588513] usb usb9: SerialNumber: PNP0D10:06
[    0.588709] hub 9-0:1.0: USB hub found
[    0.588717] hub 9-0:1.0: 1 port detected
[    0.588861] xhci-hcd PNP0D10:07: xHCI Host Controller
[    0.588978] xhci-hcd PNP0D10:07: new USB bus registered, assigned bus number 10
[    0.589025] xhci-hcd PNP0D10:07: USB3 root hub has no ports
[    0.589027] xhci-hcd PNP0D10:07: hcc params 0x08000f8d hci version 0x110 quirks 0x0000000000000010
[    0.589040] xhci-hcd PNP0D10:07: irq 80, io mem 0x09298000
[    0.589141] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    0.589143] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.589145] usb usb10: Product: xHCI Host Controller
[    0.589146] usb usb10: Manufacturer: Linux 6.14.0-rc4-ARCH+ xhci-hcd
[    0.589148] usb usb10: SerialNumber: PNP0D10:07
[    0.589342] hub 10-0:1.0: USB hub found
[    0.589350] hub 10-0:1.0: 1 port detected
[    0.589494] xhci-hcd PNP0D10:08: xHCI Host Controller
[    0.589596] xhci-hcd PNP0D10:08: new USB bus registered, assigned bus number 11
[    0.589629] xhci-hcd PNP0D10:08: USB3 root hub has no ports
[    0.589631] xhci-hcd PNP0D10:08: hcc params 0x08000f8d hci version 0x110 quirks 0x0000000000000010
[    0.589646] xhci-hcd PNP0D10:08: irq 81, io mem 0x092c8000
[    0.589734] usb usb11: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    0.589737] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.589738] usb usb11: Product: xHCI Host Controller
[    0.589739] usb usb11: Manufacturer: Linux 6.14.0-rc4-ARCH+ xhci-hcd
[    0.589741] usb usb11: SerialNumber: PNP0D10:08
[    0.589936] hub 11-0:1.0: USB hub found
[    0.589944] hub 11-0:1.0: 1 port detected
[    0.590092] xhci-hcd PNP0D10:09: xHCI Host Controller
[    0.590201] xhci-hcd PNP0D10:09: new USB bus registered, assigned bus number 12
[    0.590235] xhci-hcd PNP0D10:09: USB3 root hub has no ports
[    0.590237] xhci-hcd PNP0D10:09: hcc params 0x08000f8d hci version 0x110 quirks 0x0000000000000010
[    0.590250] xhci-hcd PNP0D10:09: irq 82, io mem 0x092f8000
[    0.590336] usb usb12: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
[    0.590339] usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.590340] usb usb12: Product: xHCI Host Controller
[    0.590342] usb usb12: Manufacturer: Linux 6.14.0-rc4-ARCH+ xhci-hcd
[    0.590344] usb usb12: SerialNumber: PNP0D10:09
[    0.590540] hub 12-0:1.0: USB hub found
[    0.590548] hub 12-0:1.0: 1 port detected
[    0.590717] SPI driver max3421-hcd has no spi_device_id for maxim,max3421
[    0.590889] usbcore: registered new interface driver uas
[    0.590912] usbcore: registered new interface driver usb-storage
[    0.590921] usbcore: registered new interface driver ums-alauda
[    0.590932] usbcore: registered new interface driver ums-cypress
[    0.590941] usbcore: registered new interface driver ums-datafab
[    0.590950] usbcore: registered new interface driver ums_eneub6250
[    0.590958] usbcore: registered new interface driver ums-freecom
[    0.590967] usbcore: registered new interface driver ums-isd200
[    0.590975] usbcore: registered new interface driver ums-jumpshot
[    0.590983] usbcore: registered new interface driver ums-karma
[    0.590991] usbcore: registered new interface driver ums-onetouch
[    0.591009] usbcore: registered new interface driver ums-realtek
[    0.591018] usbcore: registered new interface driver ums-sddr09
[    0.591027] usbcore: registered new interface driver ums-sddr55
[    0.591035] usbcore: registered new interface driver ums-usbat
[    0.591061] usbcore: registered new interface driver usbserial_generic
[    0.591068] usbserial: USB Serial support registered for generic
[    0.591527] mousedev: PS/2 mouse device common for all mice
[    0.592021] [Firmware Bug]: Unable to handle paging request in EFI runtime service
[    0.599613] ------------[ cut here ]------------
[    0.599616] WARNING: CPU: 11 PID: 1 at drivers/firmware/efi/runtime-wrappers.c:341 __efi_queue_work+0xdc/0x110
[    0.599630] Modules linked in:
[    0.599636] CPU: 11 UID: 0 PID: 1 Comm: swapper/0 Tainted: G S        I        6.14.0-rc4-ARCH+ #48
[    0.599641] Tainted: [S]=CPU_OUT_OF_SPEC, [I]=FIRMWARE_WORKAROUND
[    0.599643] Hardware name: Radxa Computer (Shenzhen) Co., Ltd. Radxa Orion O6/Radxa Orion O6, BIOS 1.0 Jan  1 1980
[    0.599646] pstate: 61000009 (nZCv daif -PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[    0.599649] pc : __efi_queue_work+0xdc/0x110
[    0.599653] lr : __efi_queue_work+0xc8/0x110
[    0.599657] sp : ffff80008271bad0
[    0.599658] x29: ffff80008271bad0 x28: 0000000000000000 x27: ffff800081f100b8
[    0.599662] x26: ffff800081ff9960 x25: ffff800081ff9978 x24: ffff00008475d128
[    0.599666] x23: 0000000000000000 x22: 0000000000000000 x21: ffff80008271bb68
[    0.599669] x20: ffff8000826777f0 x19: ffff800082677790 x18: ffff800081e3f1e0
[    0.599673] x17: 0000000000000000 x16: 0000000000002278 x15: 000000000005ed8c
[    0.599676] x14: ffff000080273780 x13: 00000000000003fc x12: 0000000000000000
[    0.599680] x11: 0000000000000001 x10: 48999a75d21dfdaa x9 : 1f3d8ffe094f3549
[    0.599683] x8 : ffff80008271b930 x7 : ffff80008271ba20 x6 : ffff80008271b9f0
[    0.599687] x5 : ffff80008271b970 x4 : ffff80008271c000 x3 : 0000000000000000
[    0.599690] x2 : 0000000000000000 x1 : 8000000000000015 x0 : 8000000000000015
[    0.599693] Call trace:
[    0.599695]  __efi_queue_work+0xdc/0x110 (P)
[    0.599700]  virt_efi_get_time+0x5c/0xb0
[    0.599704]  efi_rtc_probe+0x44/0x164
[    0.599711]  platform_probe+0x68/0xdc
[    0.599717]  really_probe+0xc0/0x39c
[    0.599720]  __driver_probe_device+0x7c/0x14c
[    0.599723]  driver_probe_device+0x3c/0x120
[    0.599726]  __driver_attach+0xc4/0x200
[    0.599729]  bus_for_each_dev+0x78/0xd8
[    0.599731]  driver_attach+0x24/0x34
[    0.599734]  bus_add_driver+0x110/0x240
[    0.599736]  driver_register+0x68/0x130
[    0.599740]  __platform_driver_probe+0x54/0xdc
[    0.599743]  efi_rtc_driver_init+0x24/0x30
[    0.599746]  do_one_initcall+0x50/0x1bc
[    0.599751]  kernel_init_freeable+0x218/0x278
[    0.599757]  kernel_init+0x20/0x13c
[    0.599762]  ret_from_fork+0x10/0x20
[    0.599764] ---[ end trace 0000000000000000 ]---
[    0.600732] device-mapper: uevent: version 1.0.3
[    0.600905] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
[    0.601517] sdhci: Secure Digital Host Controller Interface driver
[    0.601519] sdhci: Copyright(c) Pierre Ossman
[    0.601689] Synopsys Designware Multimedia Card Interface Driver
[    0.601915] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.602544] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    0.602635] hid: raw HID events driver (C) Jiri Kosina
[    0.602669] usbcore: registered new interface driver usbhid
[    0.602670] usbhid: USB HID core driver
[    0.603989] hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 21 (0,800fffff) counters available
[    0.604330] hw perfevents: enabled with armv8_pmuv3_1 PMU driver, 7 (0,8000003f) counters available
[    0.604339] watchdog: NMI not fully supported
[    0.604341] watchdog: Hard watchdog permanently disabled
[    0.605558] Initializing XFRM netlink socket
[    0.605768] NET: Registered PF_INET6 protocol family
[    0.908079] usb 8-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci-hcd
[    0.920267] Unable to handle kernel paging request at virtual address ffff800083fb8ac4
[    0.928250] Mem abort info:
[    0.931041]   ESR = 0x0000000096000007
[    0.934819]   EC = 0x25: DABT (current EL), IL = 32 bits
[    0.940124]   SET = 0, FnV = 0
[    0.943250]   EA = 0, S1PTW = 0
[    0.946380]   FSC = 0x07: level 3 translation fault
[    0.951475] Data abort info:
[    0.954344]   ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000
[    0.959994]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[    0.965200]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[    0.970500] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000007f2306000
[    0.977351] [ffff800083fb8ac4] pgd=10000007f2a86003, p4d=10000007f2a86003, pud=10000007f2a87003, pmd=10000001008ea403, pte=0000000000000000
[    0.990105] Internal error: Oops: 0000000096000007 [#1] PREEMPT SMP
[    0.996359] Modules linked in:
[    0.999403] CPU: 11 UID: 0 PID: 128 Comm: kworker/11:3 Tainted: G S      W I        6.14.0-rc4-ARCH+ #48
[    1.008871] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN, [I]=FIRMWARE_WORKAROUND
[    1.015818] Hardware name: Radxa Computer (Shenzhen) Co., Ltd. Radxa Orion O6/Radxa Orion O6, BIOS 1.0 Jan  1 1980
[    1.026151] Workqueue: usb_hub_wq hub_event
[    1.030330] pstate: 81000009 (Nzcv daif -PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[    1.037278] pc : xhci_port_is_tunneled+0x98/0xc0
[    1.041887] lr : xhci_update_device+0xec/0x180
[    1.046320] sp : ffff800086053a90
[    1.049621] x29: ffff800086053a90 x28: ffff0000846ec800 x27: 0000000000000002
[    1.056744] x26: 0000000000000000 x25: 0000000000000000 x24: ffff0000846ec858
[    1.063867] x23: 0000000000000000 x22: ffff00008478fbc0 x21: 0000000000000001
[    1.070989] x20: ffff0000846ec800 x19: ffff0000846e5000 x18: 000000000000007e
[    1.078112] x17: 0000000000000018 x16: 0000000000084030 x15: 0000000000005802
[    1.085234] x14: ffff0000837eee40 x13: 0000000000000000 x12: 0000000000000000
[    1.092356] x11: 0000000000000001 x10: a9f5c9529b51af06 x9 : 50341e5d8ea6bc67
[    1.099479] x8 : ffff800086053760 x7 : ffff800086053850 x6 : ffff800086053820
[    1.099695] Freeing initrd memory: 42396K
[    1.106601] x5 : ffff0000837eed80 x4 : ffff800083fb0000 x3 : 00000000000000ce
[    1.106604] x2 : 0000000000002187 x1 : 0000000000008ac4 x0 : ffff800083fb8ac4
[    1.106607] Call trace:
[    1.106608]  xhci_port_is_tunneled+0x98/0xc0 (P)
[    1.121681] Segment Routing with IPv6
[    1.124845]  hub_port_init+0x5b0/0xbe0
[    1.124851]  hub_port_connect+0x32c/0xa28
[    1.127313] In-situ OAM (IOAM) with IPv6
[    1.131888]  hub_port_connect_change+0x1f4/0x298
[    1.131892]  port_event+0x4d8/0x7d0
[    1.135587] mip6: Mobile IPv6
[    1.139273]  hub_event+0x148/0x490
[    1.139277]  process_one_work+0x154/0x2ac
[    1.143288] NET: Registered PF_PACKET protocol family
[    1.147181]  worker_thread+0x250/0x36c
[    1.147184]  kthread+0x110/0x1e0
[    1.151984] Key type dns_resolver registered
[    1.155262]  ret_from_fork+0x10/0x20
[    1.155268] Code: b9400c20 52915881 0b001420 8b204080 (b9400000) 
[    1.155270] ---[ end trace 0000000000000000 ]---
[    1.161625] registered taskstats version 1
[    1.200394] Loading compiled-in X.509 certificates
[    1.209069] debug_vm_pgtable: [debug_vm_pgtable         ]: Validating architecture page table helpers
[    1.218643] Key type .fscrypt registered
[    1.222568] Key type fscrypt-provisioning registered
[    1.228503] Btrfs loaded, zoned=yes, fsverity=no
[    1.233415] Key type encrypted registered
[    1.252893] pcieport 0000:00:00.0: Adding to iommu group 0
[    1.258992] clk: Disabling unused clocks
[    1.262917] PM: genpd: Disabling unused power domains
[    1.267958] ALSA device list:
[    1.270914]   No soundcards found.
[    1.274514] Freeing unused kernel memory: 2496K
[    1.279065] Run /init as init process
[    1.282716]   with arguments:
[    1.285671]     /init
[    1.287933]   with environment:
[    1.291062]     HOME=/
[    1.293409]     TERM=linux
[    1.296104]     BOOT_IMAGE=/Image
[    1.313504] efi: EFI Runtime Services are disabled!
[    1.318405] efivars: get_next_variable: status=8000000000000007